mt410

Hi guys! Any tips or advice on the quickest way to get the front and rear diffs out to add some oil? What parts absolutely have to be removed and what can stay? Thanks in advance!

Hi guys, I need a backup truck and was wondering what can I take from an Erevo 2.0 I already own. Can I use these parts from it? wheels receiver and transmitter with receiver waterproof box motor and esc batteries (2x 170 mm L, 50 mm W, 29 mm H)

Finally finished my build. After a couple of runs, I feel like the back end is dipping too much, and too easily. How do I fix this? Do I need different oil? How do I know if something is up with my shock build? Would I need to open up the caps and check oil levels? This is all new to me... Be...

I get that the super compact layout is better for high performance cars, but the milliliter scale distance between the battery and moving things, the hard to get to diffs, pain in the ass servo mount, lack of space for the ESC and motor are no fun. No protection from dirt on a monster truck is a...

Poppy’s bulletproof Tekno body post solution.

They are not listed on Tekno s website and I'm afraid they'll rub at full turn. Is adjusting the EPA necessary? How about the steering limiter washers, do I need to add one or more? What about max spring compression, is it still prevented by chassis slap?

Anyone ever have issues with the 5.8mm steering turnbuckle rod ends breaking and/or popping off with a fairly minor accident? Built my rig a few days ago and when I was assembling the steering rods I noticed that the plastic was pretty thin and soft on the ball ends. Sure enough on my second...

I had a Proline Baja bug body lying around that I tried to make fit on my MT410. No way, it's a terrible fit both in the front and rear, and not low enough to reach the mudguards. Bought an e-maxx one from the compatibility list (it was half the price of any Proline) aaaand, had to file down...

Just finished building my MT410, still waiting for a body I ordered online (seriously nothing fits that thing, even some in the compatible chart from Tekno themselves). I was left with 2 screws first, but that extra tiny one was to secure the antenna to the RX box... I'm left with a single...

Hello fellow mt fans! Been having a blast with mine, busted her up pretty good so I purchased the m2c go big or go home rear brace system. I'll say it looks like it will take a decent beating. Ordered a new rear shock tower from tekno, mine was bent pretty good. Last but not least is the t-bone...

In the process of building my MT410. What choices influence the wheelbase (and don't change much else I guess)? I saw that the rear hubs can be positioned front or rear using the plastic washers, but that doesnt seem to account for the full 12mm of variation specified in the specs. Thanks!!!!

Anyone ever try running 2.8 MT tires on their mt410? I know it’s probably not a good idea but I’m curious lol

I have an ET48.2 Truggy. I don’t want to do an actual conversion to a MT410. However I do want to take it from a track car to a Basher. I put proline shockwave monster truck tires and dropped the pinion from 14T to 13T. I’m going to swap the center diff oil to 100K. What other quick and easy...

So I'm building my MT410 now but still need an ESC and motor. I live in Ohio so I have snow and will run it in the winter waterproof is a must im looking at the mamba monster. I'm new to electric and don't know if i was want the 1700kv or 2200 speed and standing backflips not needed don't want...

Hi guys! I'm looking at purchasing an SMC 6s battery and noticed that the length and width fit the tray fine BUT the height is an issue, as they're almost 3" tall. Because of this height, the Tekno battery straps are too short to secure it. Has anyone ran tall 6s batteries, and if so, what...

Finally ordered myself a Tekno MT410 as they came back into stock in the UK :D Can’t wait for it to arrive so I can crack on with the build. I already have a Hobbywing Max8 2200kv Combo and TX/RX waiting to drop into it. Pretty much made my mind up on getting a Savox 1270 TG servo which just...

These rarely come up for sale so wanted to share. Have heard these are extremely durable and would be perfect for a MT410 or ?? PL Slipstream

Well, I finally broke my MT. I haven't disassembled it yet but it appears the split center diff mount, or the accompanied bearings, failed. Just a quick visual inspection showed the mount slightly melted which leads me to believe the bearing failed and locked up. It was after a fairly decent...

I just replaced a front CVD and noticed that the other three are bent. I am not having luck with the durability. Also my rear wheel is wobbly, could be bearings again.

What style of indestructible bodies fit the MT410? Going through bodies with these things and need a fix. What are other alternatives. The life span so far for my Dad is two weeks and the bodies done.