mt410

I am having probs with my front diff gearbox, i rebuilt the diff and shimmed it , gear mesh is good, reset the grub screw , but for some reason my front wheels stop spinning when i go run it, its like the diff is slipping from the gear in the diff housing. Please help if anyone has an answer!

I broke the front drive shaft at the cv. Is this a common issue? I did lawn dart it on the right front wheel. My Kraton would have broke the front upper arm mount but not the cv joint.

I have a problem, on my second outing with my mt410 the housing on my arrma blx 4075 2000kv motor breaks where the 4 screws holding the end cap are. Basically the material where the screw goes through breaks off at the skinny part towards the front of the housing. It was brand new so I called...

ok so is it the same build only you would use a chassis from a truggy buggy or EB 410?

I have the plastic included shock cap but want to have the same setup as stock but the aluminum version. And that is a non-vented cap with just the bleeding hole on the side? TKR6003B? No benefit to have ventilated I presume?

So I have ordered everything. The MT410 kit is back ordered along with the Futaba 3pv transmitter and receiver. Parts acquired: TKR6051 Shock Pistons TKR7075 aluminum caps TKR5060 servo brace TKR5262 diff mount TKR6146 cartridge set TKR6015 cartridge caps TKR5115 Spur gear TKR5253B 15T Servo...

Is there any good DIY methods of to keep Upper Plastic Shock tower body mount brace in place? “Poppy’s” my dads come loose when hid mt410 takes a tumble. Tried washers made of Lexan but they pulled through. M2c is out of the upper shock tower brace. When I contacted M2C racing, he said he didn’t...

Hey guys my 4 year old and I are new to the rc world, we got our first rc about 6 weeks ago it was a used brushless traxxas slash 2wd for a 100 bucks with batterys and a charger (just nimh) we beat on it pretty hard and have managed to break it everytime we take it out. We want something...

Hi from Ulaanbaatar Tekno fans, Our MT410 is ready to rip (once the new motor arrives) on 6s in the and of the Great Khaan! Was running a SkyRC 1950kv Toro motor with the Max 8 ESC on 4s, but that motor could not handle 6s. We'll now try the Max 8/2200kv EZRUN combo, a couple of HV fans, two 3s...

My wife and I both had revo 3.3’s. Back then if you wanted big and fast you went nitro. Nowadays nitro isn’t practical compared to what lipo batteries offer. We had painted many bodies together. It was a fun thing we did before kids came into the picture. A few years ago I found these two gems...

Is there supposed to be a o-ring in the cap? TKR8702 comes with o-rings but it just goes around the outside lip. Watched my dad try the emulsion style but oil drained out of the bleeder hole. He ended up just doing standard ventless. I thought I would give emulsion a try.

My dad completed his mt410. Futaba 3PV and castle 1515 2200kv + MMX. After many repeats at setting up the ESC and transmitter. It will fly in reverse. It can do double standing backflips in reverse (or is that a double standing front flip):sneaky:. Going forward maybe one third of the speed of...

Trying different tire combo's on Mt410. What is your favorite tire? Proline Badlands offer great traction but are too small in diameter. Louise Mt Pioneer are great for wet winter running, float over tall wet grass and wet muddy ground. Think they are too big for summer running. Like the Dboots...

Hi guys, got my MT410 coming tomorrow, Wheels/tyres size and tread? Servo, I’ve got a Savox 1210 waterproof, motor esc Arrma’s BLX system (new) I’ve got a set of Trenchers 3 8” 40 series, will these be too big? Many thanks guys

What is the best setup for big jumps 12-15ft high? Oil weight and or pistons?

Just installed the aluminum split center diff mount and noticed the bearing has alot of slop. I can move the diff back and forth toward the pinion. The plastic held the bearing tight. Hope it doesn't cause me to strip a spur. Anyone else notice this?

Anyone make a mt410 nitro with a nb chassis?

Thanks to Pauly for pushing me over the edge to try a Tekno. Missed my Losi Muggy so this fit the bill. Way too much has changed since i initially built it so this is just a run down. Once i start running again this year i will update as i mod or change things. Vehicle: Tekno MT410 Body...

I am planning to build a mt-410 and would like any upgrade suggestions. I have a Arrma Kraton that I have learned to drive pretty aggressively but, I break something every time I go out mainly wing mounts.:mad: I break only steering turnbuckles and pinions from big airs. I break a arms...

This tray is very tight, maybe too tight, on my 6s packs I already have, and I found a new 9000mah 75c 4s pack I would like to try, but no way it would fit. Anyone know of any aftermarket trays or any mods to get a little more length? TT