• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

Latest activity

  • Nicochau
    For a basher setup you should check Hobbywing Max8 or Castle Mamba Monster X combo. Check this...
  • TBuggy
    TBuggy replied to the thread Steering Spindle.
    These are the only aluminum spindles I have seen for the MT or any of the .3 series for that matter.
  • P
    practitioner replied to the thread Steering Spindle.
    That's what I thought, so are there no other aluminum replacements for the MT410 spindle?
  • P
    Hi All. I'm a newbie and I've got my new ET48.3 up and running and love it! I used the old electronics (MXL-6s and 2200kV motor) from my...
  • P
    poe replied to the thread Waterproof motor & ESC for ET48.3.
    Sorry, I realized I posted this in the EB section. My mistake. I'll re-post in the ET section.
  • JTRC
    JTRC posted the thread Proline screw on body mounts in MT410.
    What is everyone using for the MT410 for the screw on body caps and posts? I’m not finding one made for the mt410
  • P
    Hi All. I'm a newbie and I've got my new ET48.3 up and running and love it! I used the old electronics (MXL-6s and 2200kV motor) from...
  • E
    EvilT replied to the thread 6S Lipo brand and suitable charger.
    Availability to me is limited in the UK, what are these brand lines like? Turnigy Nano-tech 65~130c Turnigy Graphene (Black and red...
  • Nicochau
    Nicochau replied to the thread Newbie here from Toronto area.
    Doesn’t feel like an absolute MUST DO upgrade, especially if you have braces in place to reduce the flex. Enjoy the build!
  • WoodiE
    WoodiE reacted to devnull's post in the thread Newbie here from Toronto area with Like Like.
    Welcome Mike! Overkill provided some detailed instructions on the flanged bearing conversion. I have the parts but haven't installed...
  • W
    WTF MIKE replied to the thread Bulletproofing the gearbox.
    I can’t find those shims you recommend. Does anyone else make them?
  • devnull
    devnull replied to the thread Newbie here from Toronto area.
    Welcome Mike! Overkill provided some detailed instructions on the flanged bearing conversion. I have the parts but haven't installed...
  • TBuggy
    TBuggy replied to the thread Steering Spindle.
    Exotek does not makes spindles for the .3, they are made for the .4. You are correct and the geometry is different for the .4 and...
  • W
    WTF MIKE replied to the thread WTB wanted et48.3 roller?.
    Good luck I’ve been searching for awhile now with no luck so I just bought a brand new one
  • W
    Hello everyone I’m new to the Tekno forum. But been on the arrma forum for quite awhile. Just wanted to say that I just ordered an...
Top