et48.3

I have a brand new SCT 410.3 Kit that I would like to turn into a mini MT10, with mx28 badlands. I’m a rookie at building kits but I want something almost exact to the TX’s Tek Custom Rcs build with the wide stance look, and tires outside of the body. What parts do I need to complete this...

Hi All. I'm a newbie and I've got my new ET48.3 up and running and love it! I used the old electronics (MXL-6s and 2200kV motor) from my ERevo Brushless Gen1 and I'm using a 15T pinion. I run 90% of the time in the backyard grass on a course that we setup. So the vehicle is running hard...

Hi all, I had an incident today with my ET48.3 that scared the s... out of me. I was very gently bashing the Truggy at the park with my kid. Doing gentle jumps on the ramp, nothing crazy. The radio suddenly stops responding and the Truggy goes straight (probable 50% throttle) until it gets...

Hi All, I’m new to the Tekno forums and I will be getting an ET48.3 kit soon, what parts will I need to ensure the build goes smoothly? I intend to install the following parts: Hobbywing Max8 ESC and Hobbystar 4082 1600kv motor Arrma Katar wheels/tyres JX HV bls servo Futaba 3PV radio I am...

I currently have an Arrma Talion V3 and am looking for a car that is better quality and more precisely made. I am interested in the ET48.3 specifically. One of my main issues with the Talion is how quickly the drivetrain wears out. Every few weeks/few dozen runs I have to replace diff...

Hey all, After reading in this forum for a while, I decided to go for a Tekno ET48.3 - and this thing is freaking crazy! :) It was my first Kit ever built. Everything was really well explained in the manual. I decided to go for a hobbywing XR8 plus - 2250kV Motor combo with a t15 pinion. And...

Well I’ve built my truck but it is still missing electronics and mods so here I will update with that stuff. The body: Stock -secret Nardo Grey ;) - Tamiya light blue - Spazstix mirror chrome -Tamiya black - Tamiya 3mm & 6mm masking tape - Tamiya Grid mask “How to make the most hideous body in...

I am very pleased with the quality of this kit. It is an absolute blast to drive. I am still getting used to the flight characteristics, most notably brake drag and throttle control. It likes to nose dive off throttle and I already paid dearly for it! I am using a Tekin G3 T8 2000kv motor and...

Finally pulled the trigger on a Tekno truggy and new supporting gear. I've been going back and forth between the et and mt for a while, but decided that because I do a lot of on road driving the stability of the et would be better. Plus it comes with a lot of the stuff I would have bought had I...

I finished building my ET48.3 a couple days ago, but I noticed that the rear wheels have quite a bit of play or slop in them. I did build it with the optional universals so the rear inner hub bearing is different and much closer to the outer one. Just wondering if this is normal.

Not really a build thread, more of a tear down and rebuild thread. I travel for work a bit and I found this in a LHS on a shelf of consignment items while traveling in NC...it was dusty and the shell was a little beat up, but it had some descent Sweep tires and the chassis wasn’t too rough. I...

So I just purchased the Tekno ET48.3 kit. I’m pretty excited. It will be a long process. I’m hoping by end of year I’ll have everything to get it running. Maybe sooner. Along with the kit, I purchased the Arrma Dboot Backflip tires/wheels and the Tekno shock tool. I’ll be painting the body gun...

Yesterday and into last night I painted my ET48.3 body with Spaz Stix Fluorescent Orange and used the White Fluorescent backer, and the windows also just backed to white. I didn’t take a lot of photos of the process but I have some to show. This first one was after I think 2 coats. The...

Hey does anyone know if the nitro body will fit on the electric vehicle. I have a major love for the jconcepts finnisher body, but it’s only available in nitro. Any pics would be sweet. Thanks

Leadfinger Racing has slimmed down and remastered their popular LFR Strife body to fit Tekno ET48 truck. The LFR Strife body is known for being more durable with it’s thicker lexan, while offering a low profile and aggressive look. The LFR Strife body for the Tekno ET48 has a part #: LFRT4027...

Hello everyone Bought me a et48.3 roller this morning (no pics yet, being shipped) and was curious on what you guys think about motors. I currently have a choice of 2 different motors, a Castle 1515 2200kv and a Leopard 4092 1480kv. I am leaning towards the Leopard, but know that the Castle can...

Here is my MT48.3 build (i've already posted it on the facebook group but it might interest the forum guys) For the electronic i used: Spektrum DX2E and sr4210 4ch with AVC receiver Savox 1270tg 35kg(486 oz-in) 0,11s on 7.4v Hobbywing max6 mounted on a custom plate made by Michael Meyer Arrma...

If you're looking for the best Tekno ET48 upgrades then you've come to the right place. We'll be using this thread to highlight some of the most recommended and best upgrades for the Tekno RC ET48 truggy. If you're new to the Tekno RC brand and about to build your ET48 there are a few required...

I recently received my new kit from Tower. I haven't cracked the box open yet. While I'm waiting to start the build, is there any upgrade that I could purchase that you would consider either mandatory, or highly recommended?

Hobbystar 1730kv 4092 motor MM2 ESC XPERT WATERPROOF SERVO