- Thread starter
- #61
It would be really helpful if that was listed in the manual LOL. I didn't use a drill, I just did it by hand and it still took less than a minute.TEKNO recommends using a chain saw file, takes less than a minute with a drill:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
It would be really helpful if that was listed in the manual LOL. I didn't use a drill, I just did it by hand and it still took less than a minute.TEKNO recommends using a chain saw file, takes less than a minute with a drill:
I don't do any racing either. I don't know if it's better to have a tight fit and try to keep stuff out or to have a little looser fit so that stuff can come out when it gets in there. LOL I haven't had any problems with mine though.After running a few packs I think the arms loosen up anyways. Well at least mine did. I tried a drill bit but that didn’t do much. I’ll have to pick up the chainsaw file and give that a go. I don’t race so I’m not too worried about it lol!
Yeah same here. No issues either way.I don't do any racing either. I don't know if it's better to have a tight fit and try to keep stuff out or to have a little looser fit so that stuff can come out when it gets in there. LOL I haven't had any problems with mine though.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!