build

Finally almost done with the build so here's some picturesCurrently waiting for bullet connectors, metal servo horn and some tires. Stock setup except for the wing being adjusted further back a bit. Electronics: Arrma BLX100 esc (max 10 clone) Used Hobbywing 3660 4000kv Power-HD 20 kg coreless...

I am in the process of completing my ET48 2.0 Thread. This is my first kit build since a Nikko Dandy Dash ~1988. So, it has been a while. Handed down my Slash Ultimate 4x4 to my daughter and tried to buy a Teckno ET48.3 last March but as everyone knows they were discontinued until the ET48 2.0...

So here we go with a new build!! Complete stock setup/build here, where we'll highlight parts as we go along. If you like the videos, please do consider subscribing to my channel - it really does help me out - and you'll be informed when the next video is released too!! Tekno ET48 2.0...

You may remember me from a previous thread asking for pre-build thoughts on my parts list. I appreciated all the feedback i received. It was very helpful. Now i'm back for the post build advice. Comment on some or all topics, anything is welcomed. I'll figure it all out on my own eventually...

Experienced RC'r looking to put together an MT410. I used to have (15 yrs ago) a 10th scale nitro Traxxas and eventually migrated to drones and helicopters. I'm looking to get back into off-road bashing and am looking for feedback and suggestions. I'm going to be bashing in the back yard, down...

Hello everyone, After multiple setup test, i ended with: (all stock, just a little piece of m2c racing on the rear tower) motor Supass Hobby taurus 4274 1500kv (88amp, max 32v/2800w) Tekno 16 tooth pinion, stock plastic 44 spur (have the metal 44 and 46) ESC Hobbywing max8 150amp (punch 3/5...

Finally have the MT kit and enough of the bits to get this beast built. Might be a bit sporadic of a build, as my free time is limited, but will make a strong push to not drag it out and to stay up on postings. Here is the BOM: MOTOR: Castle 1515 2,200KV sensored brushless motor. Out of stock...

Went with a Novak 550 4 pole 3900, 150a Skyrc TS pro 1:8 scale esc. I had to put the receiver to the rear and use a spare bolt hole for the antenna. Fun build!

Hey everyone. Thought I’d share a few snaps of my M2C game changer chassis build. Great quality and everything went together well. Running a Max 8 2200kv but previously ran my Tekin 1900kv which might go back in yet. Drives like a little tank and seems to handle hits like one too. I built this...

I’ve been slowly building an MT410 and have been loving the build. It’s really been helpful having all of the knowledge and information about these cars here. I’ve been reading and searching even before I bought my kit and it’s taught me a lot. I’m glad this site is available and everyone is so...

I just made an account here because I thought this might be something you guys think is cool. I am a huge fan of Tekno and bashing so naturally I purchased the MT410, however I've always liked the handling and feel of a longer wheelbase. I didn't want to get rid of the Monster Truck body...

Keeping the first post open for up to date picture and equipment list Kit arrived!!

Hi All, I’m new to the Tekno forums and I will be getting an ET48.3 kit soon, what parts will I need to ensure the build goes smoothly? I intend to install the following parts: Hobbywing Max8 ESC and Hobbystar 4082 1600kv motor Arrma Katar wheels/tyres JX HV bls servo Futaba 3PV radio I am...

I remember when I first started reading RC forums; there had been, for years, thoughts of modifying a stadium truck into a 4wd "animal". Time past, and OFNA did it. They (OFNA/HoBao) put out the Hyper 10-TT. I thought that was just plain 4wd stadium truck greatness! I couldn't see myself coming...

Was very good build I enjoyed it. Still have stuff to do but almost complete I also painted with my new air brush for the first time as well. The body is all paint no decals but I went to far with my blade cutting out the liquid mask oh well its a bash body!! Will gorilla tape in the body. Jason...

I am about 90% done with the car and it is absolutely fantastic to build. It is obviously very similar to my ET48.3, but the subtle upgrades to the steering and the driveline are nice touches. I really appreciate how easy 1/8th scale is to work on. Turnbuckles are a breeze!! I did have an...

Finally finished my build. Tekin RX8 Gen3 w/ Gen3 1350kv - 17t pinion GenAce 6s 4500 Proline Badlands 3.8s Savox 1270 Proline 72 c10 body taped and shoe gooed. Aluminum shock caps Steel spur gear Sanwa 482 reciever Tekno aluminum servo horn XT90 connectors

Hey all, After reading in this forum for a while, I decided to go for a Tekno ET48.3 - and this thing is freaking crazy! :) It was my first Kit ever built. Everything was really well explained in the manual. I decided to go for a hobbywing XR8 plus - 2250kV Motor combo with a t15 pinion. And...

Well I’ve built my truck but it is still missing electronics and mods so here I will update with that stuff. The body: Stock -secret Nardo Grey ;) - Tamiya light blue - Spazstix mirror chrome -Tamiya black - Tamiya 3mm & 6mm masking tape - Tamiya Grid mask “How to make the most hideous body in...

Things I've done..... thoughts and comments on what else to do... 1. C-10 body 2. Hobbywing xerun max 8 esc , Xerun 4268 1900kv motor. 3.19 tooth mod 1 pinion 4. Steel Spur 5. Savox 1283 sg 6. Smc 4s bat. 7. Proline badlands with desperados wheels. 8. Aluminum shock caps. 9. Futaba 3pv Remote...