build

So I've finally accumulated everything I needed for the most part to give this a shot. The 210.3 is a 2WD conversion of the SCT410.3 https://blog.teknorc.com/2017/03/08/diy-sct410-3-2wd-conversion-by-christian-hernandez/ Found a bunch of great info on this in the FB forum and used it as a...

Here is my MT48.3 build (i've already posted it on the facebook group but it might interest the forum guys) For the electronic i used: Spektrum DX2E and sr4210 4ch with AVC receiver Savox 1270tg 35kg(486 oz-in) 0,11s on 7.4v Hobbywing max6 mounted on a custom plate made by Michael Meyer Arrma...

Thanks to Pauly for pushing me over the edge to try a Tekno. Missed my Losi Muggy so this fit the bill. Way too much has changed since i initially built it so this is just a run down. Once i start running again this year i will update as i mod or change things. Vehicle: Tekno MT410 Body...

Some stuff came in today, and some stuff I already had. This is round 2 for me with the MT410. Sold my 1st build so I figured it was time to do a 2nd:) Steel spur came in with the kit, servo is a Savox 1283SG that I won in a raffle on FB as well as the wheels and tires. Tires are taped and glued...

I have added the T-Bone wheelie bar since these pictures were taken and it's been to cold here in NJ to paint the Proline Baja Bug body I got for it.

Hobbystar 1730kv 4092 motor MM2 ESC XPERT WATERPROOF SERVO

Here's my new to me SCT410. Running the HW SCT combo with the 4300KV motor, Savox Ty Tessman servo, currently geared 16/44. Pretty much just running the Tekno recommended setup sheet. It has aluminum diff cross pins, aluminum hexes, aluminum A & C blocks, aluminum hexes, HRC hubs, .4 ackerman...

Well I finally got this bad boy built!! The majority and final parts all arrived Friday afternoon and I started building on Saturday morning around 10. I had started working on the body - a JConcepts Bajr body that I've had laying around for a year or so - on Thursday. I actually finished...

Hello All Here is my MT410 build. I haven't gone too mad with the upgrades but here are the items I have added (not in the pictures): TBone Front Bumper TBone Rear Bumper and Wheelie Bar M2C Rear Brace M2C Center Brace Ford Raptor Unbreakable Body These pictures were when I had first built...

Hiya everyone. Woodie was kind to invite me here so I'll share build details on my current rig, the MT410. I was very active on the URC forums (RIP) where I had multiple build threads, unfortunately they were also posted on photobucket and I angrily closed my account with them before I...

Hi there, the following are the parts that I ordered for my MT410 building project Unfortunately, I have to deal with long delivery time for to Mexico and some parts like Radio, Body, tires and some others still on the way. Tekno RC 1/10 MT410 Pro 4x4 Kit EZRUN Combo MAX8 Series (TYPE: T-Plug)...

I am currently finishing up my MT and am using a Proline 2017 F150 Raptor body, Dboots Backflips wheels and tires, a JX CLS-HV7346MG servo, Arrma BLX185 motor and ESC with a Futaba 4PLS radio. I can't wait to get it done and test it out.

Hey everyone, I just recently bought an ET48.3 and am currently in the middle of the build. I plan to keep this thread updated and report on any progress I have made. Next step is electronics and power plant! Pics soon to come! My plan is to mimmik RC OFF-ROAD DOWNUNDER's ET. I think it's...