truggy

I am in the process of completing my ET48 2.0 Thread. This is my first kit build since a Nikko Dandy Dash ~1988. So, it has been a while. Handed down my Slash Ultimate 4x4 to my daughter and tried to buy a Teckno ET48.3 last March but as everyone knows they were discontinued until the ET48 2.0...

So here we go with a new build!! Complete stock setup/build here, where we'll highlight parts as we go along. If you like the videos, please do consider subscribing to my channel - it really does help me out - and you'll be informed when the next video is released too!! General/tip videos...

New Tekno RC ET48 2.0 1/8th 4WD Competition Electric Truggy Kit![/HEADING] At the Tekno RC HQ, one of our favorite classes is E-Truggy. Plenty of power, large truck tires, and loads of fun with friends. We brought E-Truggy to the masses with the original ET48 and refined it to be one of the...

Need a lil help. I have a set of proline shockwaves on my mt410. I ordered a 48.3 truggy and want to know what other options for tires i can use? I have the m2c truggy chassis coming as this will be a basher. Can i use a smaller profile or maybe more narrow tire? what about hexes will I need to...

Finally pulled the trigger on a Tekno truggy and new supporting gear. I've been going back and forth between the et and mt for a while, but decided that because I do a lot of on road driving the stability of the et would be better. Plus it comes with a lot of the stuff I would have bought had I...

I finished building my ET48.3 a couple days ago, but I noticed that the rear wheels have quite a bit of play or slop in them. I did build it with the optional universals so the rear inner hub bearing is different and much closer to the outer one. Just wondering if this is normal.

I have an ET48.2 Truggy. I don’t want to do an actual conversion to a MT410. However I do want to take it from a track car to a Basher. I put proline shockwave monster truck tires and dropped the pinion from 14T to 13T. I’m going to swap the center diff oil to 100K. What other quick and easy...

Anyone considering building this out as a 1/10th scale basher?? TT

Posted some of this in my intro thread but adding a few more photos and details. This was on Friday night, surprise announcement from our local track shop saying they had kits in stock so we didn’t have to wait until the 15th. Intended to pull electronics from my other cars.

This is a list of Tekno RC suggested equipment list for the new Tekno ET410 1/10th scale truggy. This is just some initial recommendations so please share below what gear you are or plan on running in your Tekno ET410 truggy. Front & Rear Wheels - 12mm hex, AE offset Associated stadium truck...

From the SDRC Facebook page. Looks a tad longer than the EB

Go to the sdrc page on liverc. Mason eppley matt armeni testing a "mini truggy" and sdrc posted a pic on fb of eppleys radio with model name ET410

Tekno NT48.3 Manual Tekno RC NT48.3 user manaul Tekno RC Vehicle Setup Guide Tekno NT48.3 Setup Sheet NT48.3 blank setup sheet - (editable, savable) Filled Setup Sheets: 2015/09/19 NT48.3 - Billy Fischer - All Around Setup Outdoor Various Conditions.jpg 2015/09/22 - NT48.3 - Ryan Lutz -...

Tekno ET48.3 Manual Tekno RC ET48.3 user manual Tekno RC Vehicle Setup Guide Tekno ET48.3 Setup Sheet ET48.3 Blank setup sheet – (editable, savable) Filled Setup Sheets: 2015/09/23 - ET48.3 - Joe Bornhorst - Race Against Cancer.jpg 2016/03/23 - ET48.3 - Patrick Littleton - Base Outdoor Med...