Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
I think it depends on what application you are running. If you are running regular can truggy motors then the max 8 is completely fine. I’m running much larger can motors which require more juice. My current motor is the leopard 4092 1730kv and I think I’m going to run the Poseidon P1527 next which is an 106mm can. The max8 might be able to run it but I think it’ll hit thermal quickly. This is a guess. I’ve not actually tried it.
So I have it installed but the body does not fit properly with the two machined pieces from MikeWhy isn't it installed yet?!
Sadly this is a common complaint about T-Bone Racing. There are several others having the same issue over at ArrmaForum.Not sure when my T-Bone parts come in. The status still says unfulfilled on my account. Weird. I’ll have to reach out to them....
Sent them a message. They responded and said they are working on it!Sadly this is a common complaint about T-Bone Racing. There are several others having the same issue over at ArrmaForum.
T-Bone Racing has told me in a PM that they are working to resolve the issues as quickly as they can. I hope for everyone's benefit they get everything back under control.
Might not hurt to send T-Bone Racing an email for a status update.
That would work! How is it working with where you put it? I imagine you had to modify the body?I spoke with Mike about a brace that holds the ESC over the servo area off of the steering plate, so we can fit the larger motors. Also the stock body has more room there so it should be able to fit bigger ESC's. He said if he has time he will make one. If you show interest then I am sure it would help.
That would work! How is it working with where you put it? I imagine you had to modify the body?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!