Overkill
Well-known member
M2C wide truggy chassis
I countersunk 6 holes to create a different layout. 3 for the ESC plate, 2 for the receiver box, and 1 for the wire guide.
Tekno wire guide (TKR4106)
Tekno EB48 2.0 stand-alone receiver box (TKR9065)
M2C ESC plate rotated 90* and moved further inward, I love the versatility of this plate.
Kydex 2mm sheet for the battery supports, then shaped with a heat gun.
All Racing 7075 gearbox. These use much larger 5x15x5 pinion bearings, which is a major plus for big power builds like this.
Losi HD center diff case with 40T Fly Ratio spur gear.
Proline Badlands 5.85"
Belted with vectran braid (stronger than Kevlar)
Cordova 1440 (40x102mm) 2000kv. This motor is absolutely amazing, it makes a ton of power and runs ice cold regardless of gearing. I'm currently running 24/40 gearing.
Castle MMX 8S. Castle did a really great job with the design of this ESC.
TPP 40mm aluminum case fan. The stock plastic fan broke very quickly.
OSE 8mm anti-spark connectors
Proline thumbwasher kit
Turnigy Graphene V2 6S 5000mah
Servo turned around, along with a hole for the wire exit, for the M2C wide chassis.
M2C 7075 center chassis brace
Exotek steering assembly. The stock one works great, just wanted to try it.
O-ring for a rear motor support
40mm ID, 6mm width
I like the ESC positioned here much better.
I countersunk 6 holes to create a different layout. 3 for the ESC plate, 2 for the receiver box, and 1 for the wire guide.
Tekno wire guide (TKR4106)
Tekno EB48 2.0 stand-alone receiver box (TKR9065)
M2C ESC plate rotated 90* and moved further inward, I love the versatility of this plate.
Kydex 2mm sheet for the battery supports, then shaped with a heat gun.
All Racing 7075 gearbox. These use much larger 5x15x5 pinion bearings, which is a major plus for big power builds like this.
Losi HD center diff case with 40T Fly Ratio spur gear.
Proline Badlands 5.85"
Belted with vectran braid (stronger than Kevlar)
Cordova 1440 (40x102mm) 2000kv. This motor is absolutely amazing, it makes a ton of power and runs ice cold regardless of gearing. I'm currently running 24/40 gearing.
Castle MMX 8S. Castle did a really great job with the design of this ESC.
TPP 40mm aluminum case fan. The stock plastic fan broke very quickly.
OSE 8mm anti-spark connectors
Proline thumbwasher kit
Turnigy Graphene V2 6S 5000mah
Servo turned around, along with a hole for the wire exit, for the M2C wide chassis.
M2C 7075 center chassis brace
Exotek steering assembly. The stock one works great, just wanted to try it.
O-ring for a rear motor support
40mm ID, 6mm width
I like the ESC positioned here much better.
Last edited: