Overkill
Well-known member
I saw your pics in the other thread of the M2C center brace. I have two of them and the first one (from the 1st batch) fit just fine, however the second one (from the 2nd+ batch) was off by 1mm or so on the steering top plate hole. I had to push it very hard towards the rear to get that screw started, my chassis is not bent (100% for sure). Be sure to have all of the screws loosely fitted before tightening them, that's very important.
As far as the brace hitting the servo, be sure to use the smallest OD washer on the left side servo screw, otherwise it may be hitting it and causing interference.
As far as the aluminum steering top plate and center diff plate, I'm having shipping issues with the guy in China and unfortunately do not have an ETA at this time. I will let you know when I get an update. I ordered them 2+ weeks ago.
As far as the brace hitting the servo, be sure to use the smallest OD washer on the left side servo screw, otherwise it may be hitting it and causing interference.
As far as the aluminum steering top plate and center diff plate, I'm having shipping issues with the guy in China and unfortunately do not have an ETA at this time. I will let you know when I get an update. I ordered them 2+ weeks ago.