KnowAir
Well-known member
- Messages
- 199
- Reaction score
- 167
- Tekno RC's
- MT410
- SCT410
- Driving Style
- Basher
Makes sense, guess it's trying to rotate as it leaves the jump under acceleration, therefore keeping the nose up?@KnowAir , one trick I found to work with the Tekno SCT is always accelerate on the jumps. It has something to do with compression the back springs and it jumps a lot better this way. Always accelerating before air
I've seen folks using the EB48 springs on the rear..
I don't have any on hand, but do have the stock springs from my TC kronos xtr. General consensus on them is they're too soft for the kronos..The fronts seem pretty close in length. I might give them a try, can always swap back if they prove too stiff.
@Hector_Fisher , I previously had told you the stock rear springs seemed fine on the sct410.3, I'm not sure now, as they seem to have broken in, they seem a bit soft now. I keep turning up the preload on them..