et410

I haven’t been in the hobby for about 10 years and,bought these kits to get back into it. These builds were fun. They got me hooked into the hobby again. To be honest if it wasn’t for this kit and, model. I probably wouldn’t have got back into it. Kudos to Tekno for making something that will...

I have an EB 410 and an ET 410. I've had these for a couple years and should probably rebuild shocks (especially since at least one is leaking). I'm not sure if there are certain parts that make sense to replace and others that are okay to reuse? Any guidance you all have on rebuilding the...

What are your thoughts on building a second Tekno ET48 2.0 as a basher so I can keep my Race prep one dedicated for that, or should I build an ET410 as a second race car? I'm not sure if there is any class for this in Australia and I'm worried about what tyres they use? Any advice would be...

Hey guys I'm new to the hobby and I am not 100% sure what tires will fit properly and which won't. Would these tires fit by any chance? If they do not fit please direct me to some that will. I'm looking for a nice tready tire...

Hey guys, hope all of you are staying safe and ripping some hot laps :) I've looked over the manual a few times, and watched a few unboxing vids. But for the life of me.. I can't find an answer to my question, I'm hoping someone here can help. Does the ET410.2 come with a receiver box? If...

Went with a Novak 550 4 pole 3900, 150a Skyrc TS pro 1:8 scale esc. I had to put the receiver to the rear and use a spare bolt hole for the antenna. Fun build!

Couldn’t wait for the electronics to come in. Went ahead and put her together!

Im brand new to both the ET410 and dirt racing. My tracks in the NW are carpet but I have decided to enter the Jconcepts INS9 event at TCRC in Washington in May. Desperately looking for any solid dirt setups that will get me in the right direction. Not sure how much my carpet setup that...

The wheels I'm using are Pro-Line's Renegades PRO2725-03 intended for use on the HPI Blitz, Ultima SC6, Jammin SCRT 10, and other RCs that use the Traxxas Slash (rear)/Slash 4x4 offset. The problem? Tekno's wheel hexes (stock TKR5571M) are not wide enough and/or the Pro-Line wheels have too...

I remember when I first started reading RC forums; there had been, for years, thoughts of modifying a stadium truck into a 4wd "animal". Time past, and OFNA did it. They (OFNA/HoBao) put out the Hyper 10-TT. I thought that was just plain 4wd stadium truck greatness! I couldn't see myself coming...

My first Tekno arrived under the tree on Christmas morning. I got started right away, and it took me about 2-3 days to finish the build, and then another couple days to finish the body. I'm still in the painting process at the moment, but the truck is otherwise finished. I'll post some pics.

Im new to the Et410 and need some help with traction rolling on carpet. I run Stock set up with Proline prism S/T on all four. Ride ride hire is 20mm

The new Tekno carbon fiber receiver tray allows the radio receiver to be mounted off the chassis. This frees up space on the chassis to use other electronics. This becomes very useful on the Tekno EB410 and EB410 models as they often use larger Electronic Speed Controllers (ESC). Features of...

The new Tekno HD differential outdrives and coupler for the Tekno EB410 and ET410 have just been announced. These new HD outdrives and couplers have less material removed to improve the durability and impact resistance, making them a perfect upgrade for bashers and even carpet racing with their...

What's a good Diff set up for Et410?

I live in the UK, no tracks near me so I run at the local park. It’s really thick grass that doesn’t get cut all that often. I had to monsterize my Slash 4x4 with Trenchers to get through it. Will the ET410 be able to handle thick grass? Does it have good ground clearance? Or would a 48 truggy...

RCNetwork posted a Tekno ET410 build review and his thoughts about the new kit. Unsurprisingly the overall review is very positive, with the biggest complaint being the plastic shock caps, though improved over past versions and the lack of a low profile servo mount included as the EB410 has...

OK, so I'm a little late to the party here. Picked my truck up and then went on vaca. But I'm back now and started the build. I had everything purchased before picking up the kit. So that was nice. Everything is brand new except my Pro 4 motor, which was used. I wasn't totally sure if this motor...

Anyone considering building this out as a 1/10th scale basher?? TT

Well its in and I am super excited for this build! Plan to run this mostly at the outdoor track but may bring it indoors later on down the road. I have a couple of parts that were extras and some pulled from other rigs that I will be using to get this up and going. Parts list: Electronics...