• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

Chainsaw10’s MT410

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Currently running tp power 92mm long can 1600kv motor(its 16....something, I forget...think it’s listed as 1630)
Mamba Monster X esc
Savox 1270 servo
Esc mounted on chassis brace to make room for the motor.
Chassis brace also is a body support/mount that greatly extends the life of bodies.
Running 4s, 5s and 6s depending on location and mood:)

I don't think your motor is big enough :eek:
The way I drive I still get these big motors pretty hot. I was really cooking standard size motors.
 
Are those DHK Optimus tires?
Tires in the video are proline mx38 Badlands. Tires in first photo are proline Big Joes
 
Which do you prefer?
I really like both. I’m always swapping....I also have approximately yen other sets of tires that I can run on this truck...and my many other 1/8 scales. I’m a certified rc tire addict.
 
Here’s my MT410 compared to my Vorza monster build. They are almost exactly the same dimensions.
IMG_2940.jpg
 
What pinion do you use to overheat that motor ?
 
What pinion do you use to overheat that motor ?
I have a 15 tooth pinion on all of Teknos. If I’m driving like a nut job I can get these big motors up to 160 to 180 degrees in less than 10 minutes on 4s.

ten sets of tires, ten sets of chain saws ... lol
I’ve got more than 10 chainsaws:)
 
If i'm running normal like without doing constantly standing backflips will a TP4070 1520kv run cool?
 
Narrowed the old MT with eb48.3 parts....a little more of a scale-ish truck now
C0A8C38B-8A43-4560-A245-E12D37DA9BA9.jpeg
67B5CAD1-D80D-4FB0-BB97-C72878F67C8A.jpeg
481E5BCF-7C17-4ED4-AED5-BBE1707DE95F.jpeg
C0A8C38B-8A43-4560-A245-E12D37DA9BA9.jpeg
 
Just stumbled onto your vid of the backflips on YouTube OMG..!!! ???

I've just bought a MT410 and I'm liking your motor/esc setup and particularly what you say about 4092 motors..!!

I run Max6/4092 in my Kraton and it's a torque monster but your MT is in another league ?

I know its a long time ago since you built your truck but do you know what spec your TP motor was..??

Thanks
 

Recent Popular Liked

Back
Top