• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

This truck is a beast!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Hypnotoad

Active member
Messages
26
Reaction score
22
The MT410 has been a blast. On 6s it's just nuts! Stripped the stock spur gear yesterday trying to do a standing backflip in the grass, but i had the steel spur on deck and got it on this morning. On 6s I dont even have to give it full throttle, it's a rocket!
 

Attachments

  • 20180709_130926.jpg
    20180709_130926.jpg
    154.6 KB · Views: 334
  • 20180709_130937.jpg
    20180709_130937.jpg
    186.1 KB · Views: 309
  • 20180709_104901.jpg
    20180709_104901.jpg
    80.1 KB · Views: 344
  • 20180709_104851.jpg
    20180709_104851.jpg
    107.5 KB · Views: 353
he he yeah that's why i just run 4s, it's fast enough... never tried 6s, it must be nuts.
how much louder is the steel spur? i put a steel spur into an AE truggy I had an it made it sound like a nitro dang near, didn't like that...
 
It's not as loud as I thought it would be, not enough to make me want to take it off. I'm going to try it on 4s today also and see how that is. But i'll probably just run it on 6s, I like having that extra oomph on tap. I'm going to see how fast it is on 6s today also, going to put my RC gps on there.
 
Be careful on 6s, i burned up a center diff, blew a bearing in the front gearbox and ruined the pinion gear in the front gear box. The motor gets hot fast too. Its a freaking blast but hard on the truck, did you go with a heavier weight diff fluid in the center diff? I went up to 200k , otherwise say goodbye to your center diff bash on bro!
 
Be careful on 6s, i burned up a center diff, blew a bearing in the front gearbox and ruined the pinion gear in the front gear box. The motor gets hot fast too. Its a freaking blast but hard on the truck, did you go with a heavier weight diff fluid in the center diff? I went up to 200k , otherwise say goodbye to your center diff bash on bro!
I've ran mine on 6s a bunch and haven't had any problems with bearings or gears. The motor and esc do get pretty warm though. After a full 6s, 5000mah pack my motor and esc were both at 170°F when it was 90-95°F outside, so not horrible for such a hot day but still warmer than I would ideally like.
 
Still running stock diff fluids. Had the truck for a month now and nothing but 6s. Just chewed up a pinion gear and shredded the stock plastic spur gear. Was running it in Georgia heat and it ran good. 3/4 throttle is all that is needed lol. Full throttle on 6s is like a rocket.
 

Recent Popular Liked

Back
Top