greatdividers
Member
Greetings Tekno people! Beware, I'm fairly new to the RC hobby. I currently have a Arrma Mega Senton as well as a Twin Hammers that I'm almost finished building.
I've recently purchased what I believe is everything required for a decent SCT410 build. My main goals with this are to enjoy the build process, durable bashing, maaayyybbeee get into racing. We have indoor and outdoor 1/10 4x4 short course but I've yet to go to the tracks at all. Here is a list of what I've purchased and I have a few questions too.
Did I miss anything? I know I need paint for the body. Looking at it I think I need a servo horn/saver too. Any recommendations would be appreciated.
I have 10, 15, 30, 50 diff fluids. Recommendations for what goes in each diff? My plan was 15-30-15
Shock oils I have are 27.5, 32.5, 37.5, 50. Recommendations appreciated. Plan was 37.5 front 32.5 rear.
Is my run time going to be poor for bashing? I feel like this motor/esc is more appropriate for racing... maybe not bashing. I currently only have one 2s 5000mah 100c battery.
Thanks for reading and any help! I'm glad to finally have my Tekno
I've recently purchased what I believe is everything required for a decent SCT410 build. My main goals with this are to enjoy the build process, durable bashing, maaayyybbeee get into racing. We have indoor and outdoor 1/10 4x4 short course but I've yet to go to the tracks at all. Here is a list of what I've purchased and I have a few questions too.
SCT410.3 Kit |
XR8 SCT Pro ESC Combo With 3660SD-A (4300kv) Motor |
Savox 1256TG .15/277oz |
Hinge Pins Inner Front/Rear EB48/SCT410 |
Pro-Line Badlands MX SC M2 MTD Impulse ProTrac F/R |
JConcepts Illuzion SCT Ford Raptor SVT Clear Body SCT-R |
Tekno RC HRC Rear Hubs L/R CV or Uni SCT.3/SL |
Tekno RC Low Frequency Shock Spring Set Front Orange |
Tekno RC Low Frequency Shock Spring Set Rear Green |
Tekno RC Shock Cap Aluminum Non-Vented Top (2) |
Tekno RC V2 Adj Hinge Pin Brace "C" Block Alum EB/NB |
Tekno RC V2 Adj Hinge Pin Brace "A" Block Alum EB/NB |
Spektrum DX2E ACTIVE 2Ch DSMR Radio w/SR310 |
Tekno RC Pinion Gear 17T M5(MOD1/5mm Bore/M5 Set Scrw) |
Did I miss anything? I know I need paint for the body. Looking at it I think I need a servo horn/saver too. Any recommendations would be appreciated.
I have 10, 15, 30, 50 diff fluids. Recommendations for what goes in each diff? My plan was 15-30-15
Shock oils I have are 27.5, 32.5, 37.5, 50. Recommendations appreciated. Plan was 37.5 front 32.5 rear.
Is my run time going to be poor for bashing? I feel like this motor/esc is more appropriate for racing... maybe not bashing. I currently only have one 2s 5000mah 100c battery.
Thanks for reading and any help! I'm glad to finally have my Tekno