Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
Nice, have fun building it.
I could not find one in the UK that was in stock but having now had a look at the Tekno shock building video i have ordered one from Finland don't want to mess up the shock's using tools not made for the job.I finished my truck a few weeks ago and I'm jealous. I want to build it again?
Arrma back flips I see. Good choice. Did you get the Tekno shock tool wrench?
It is such a great tool and will save you hands and fingers from pain.
Just learning how to solder again!! fingers crossedAlmost there!
I could not find one in the UK that was in stock but having now had a look at the Tekno shock building video i have ordered one from Finland don't want to mess up the shock's using tools not made for the job.
You really won’t mess anything up without the tool. The tool is great for holding the shock shaft safely when assembling. I have seen videos of people using needle nose pliers to hold the shafts and they were just tearing the metal up. The shock tool really came in handy when I was doing the turnbuckles assembly which I see you have already done. Your fingers are probably pretty sore.I could not find one in the UK that was in stock but having now had a look at the Tekno shock building video i have ordered one from Finland don't want to mess up the shock's using tools not made for the job.
You really won’t mess anything up without the tool. The tool is great for holding the shock shaft safely when assembling. I have seen videos of people using needle nose pliers to hold the shafts and they were just tearing the metal up. The shock tool really came in handy when I was doing the turnbuckles assembly which I see you have already done. Your fingers are probably pretty sore.
I used both. The wrenches I used when fine turning the turnbuckles. The tool was perfect for putting the ball joints on the turn buckle ends quick and easy and I also used the shock shaft holder to hold the rod and I put a hex driver in the eyelet to tighten the ends.How did you use it for the turnbuckles??
I have the turnbuckle wrenches - did you use the shock tool instead of the turnbuckle wrenches?
I used both. The wrenches I used when fine turning the turnbuckles. The tool was perfect for putting the ball joints on the turn buckle ends quick and easy and I also used the shock shaft holder to hold the rod and I put a hex driver in the eyelet to tighten the ends.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!