Jerry-rigged
Well-known member
- Messages
- 75
- Reaction score
- 73
- Tekno RC's
- SCT410
- Driving Style
- Basher
- Thread starter
- #61
Lunch bash. Ran the SCT410 and my Granite 4x4. Still no LVC to be found.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
I have one in my shopping cart on Amain.I was just thinking the same thing... "Man @Slick2500 should so buy a Tekno!"
hello, i know this is an old post, but does the arrma body fit straight onto the body posts with the pre drilled holes? I really like this paint job as well for an RTR.Skate park 1, Tekno 0.
Broke an axle, on a chitty warm up traxxas size jump.
But then when I got home, the Mail man brought me a box!
Yeah, the Tekno is under there. I am not normally a fan of factory RTR paint, but I've wanted this body from the day it was announced...
So now I have a basher body and a track body.
=)
Sorry for the late reply-hello, i know this is an old post, but does the arrma body fit straight onto the body posts with the pre drilled holes? I really like this paint job as well for an RTR.
Also check the motor bearings, a rebuild is simple.Howdy Gang!
I finally joined the Tekno family, with a well used SCT410. I got this truck real cheap, and it will be kind of a restoration, as much as anything. I am not sure if it is a .1 or a .3 It did come with a Tekin Pro4 motor, a HW "JustStock" ESC (Will that tiny ESC run that Pro4?), a servo (off brand, but supposed to be great?), and a box of used tires (mixed SCT and Truggy) for $200. No body, one corner is missing the hex/pin/cvd pin, and there is a bit of surfice rust on lots of screws, and most of the outdrives/dogbones. Front right arm (same one missing the hex) has a bad creak and is binding a bit. 2 shocks leaking, and no shock boots. And a broke front bumper. So yeah, this will be a project.
To-Do:
- Full tear down and cleaning, look for more problems.
- Find binding in front arm
- Rebuild shocks, probably need to get me some AE green slime.
- Front bumper - new stock bumper, or TBR or ?
- CDV rebuild kit.
- New wheel Hex kit.
- Body - Bug? or SCBE? Doubtful I will get a SCT body.
Maybe do:
Any tips, advice, and silly comments are welcome!
- ESC - will this JustStock ESC be able to survive powering a Pro4 4800 motor? I worry about this. Maybe ESC swap.
- Motor - Maybe throw my BLX185 combo in there and run on 4s?
Jerry
View attachment 1217
View attachment 1214
View attachment 1215
View attachment 1216
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!