munchagepeople
New member
- Messages
- 3
- Reaction score
- 0
I see a bunch of discussion on the opposite direction (ET410 -> SCT), but has anyone converted their sct410.3 to an ET410.whatever?
-
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
Conversion to ET410
- Thread starter munchagepeople
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
The SCT410.3 and ET410 are based off of two completely different platforms. It probably was the SCT410SL and ET410 platforms that were being discussed as they share a good majority of parts.
munchagepeople
New member
- Messages
- 3
- Reaction score
- 0
- Thread starter
- #3
I think what I've actually seen is a conversion to sort-of-but-not-quite-et48.3 -- 48.3 shocks & towers, with a truggy body put on top, and SCT wheels/tires..
Not too many parts needed, but closer to 1/8 truggy than 1/10
Not too many parts needed, but closer to 1/8 truggy than 1/10
The conversion that I think you are talking about..My dream off-road vehicle - SCT410 to Truggy conversion (not ET410)... I'd call it a monster buggy build with a truggy body, or a 1/9 scale truggy build, because of the chassis being used is a SCT/1/8 scale buggy chassis.
