monster truck

Hello everyone, After multiple setup test, i ended with: (all stock, just a little piece of m2c racing on the rear tower) motor Supass Hobby taurus 4274 1500kv (88amp, max 32v/2800w) Tekno 16 tooth pinion, stock plastic 44 spur (have the metal 44 and 46) ESC Hobbywing max8 150amp (punch 3/5...

Hello, just received this awesome bumper from T-Bone Racing, but no instructions. It might be straight forward but I don't want to screw it up. I search the web with no luck and I did send an email to T-Bone Racing, haven't heard back from them yet. Anyone have instructions?

Am I reading this right ? People are putting 6s lipo set ups in the tekno mt410? Is this the TEKIN 200kv motor and the rx8 gen 2 set up? I've got my kit on the way, just trying to clear up where I want to be with this project when compleated, any suggestions are very appreciated.

I’ve been slowly building an MT410 and have been loving the build. It’s really been helpful having all of the knowledge and information about these cars here. I’ve been reading and searching even before I bought my kit and it’s taught me a lot. I’m glad this site is available and everyone is so...

Hello everyone. I have been running 6s ARRMA vehicles and this is my first kit, MT410. The quality of this kit is just amazing and a blast putting together. After reading lots of threads and research I am still trying to figure out if I want to run 4s or 6s. I run 6s on my ARRMAs but don't...

I just made an account here because I thought this might be something you guys think is cool. I am a huge fan of Tekno and bashing so naturally I purchased the MT410, however I've always liked the handling and feel of a longer wheelbase. I didn't want to get rid of the Monster Truck body...

Been looking at an MT410 for some time and today I bought one. Right now, I'm reading through the threads looking for ideas on my build. Any tips and tricks would be great. Right now, I'm currently running an E-Revo on 6S and loving the speed and power on 6S but ya it tends to break (I bet a lot...

Hello to everyone and thank you in advance for your help. I haven’t driven my MT410 in about six months, not my choice life just got busy. I do not know what you guys would suggest that I do before starting to drive it again. Thanks once again

I have an ET48.2 Truggy. I don’t want to do an actual conversion to a MT410. However I do want to take it from a track car to a Basher. I put proline shockwave monster truck tires and dropped the pinion from 14T to 13T. I’m going to swap the center diff oil to 100K. What other quick and easy...

Anyone considering building this out as a 1/10th scale basher?? TT

If you're still not sure about getting the Tekno MT410 monster truck, then take a look at this quick video review of the Tekno MT410! I've been an Arrma fan for a while now and found RCNetwork's comparison between the MT410 and the Arrma Outcast interesting.

Tekno MT410 Manual Tekno RC MT410 user manual Tekno RC Vehicle Setup Guide Tekno MT410 Setup Sheet MT410 blank setup sheet – (editable, savable)