• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

410 2.0 Convert my Tekno SCT410 2.0 from 12mm hex hubs to 17mm

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
You've done your homework. I don't see where the hexes say they come with wheel nuts. They will be the same wheel nuts that come on the 48 trucks.
 
I think you are missing TKR1602 (dont forget Loctite on these)
Also if you are running 4s, change the center diff gears with the TKR5149 & TKR5150
 
headsmell said:
Yes, if you are running 4s the plastic in the center diff will break.

If you are running 2s, you should be fine with the stock grears.

I'm running a HW 4268 2200kv motor/ 16th tooth pinion in my sct410.
Click to expand...
My motor 3300KV, 4S battery , then... all the tires are blown !:LOL::LOL:

702813361_26546897125012772_4690992162705717421_n.webp


705705775_26546897148346103_7912202141137658161_n.webp
 
liufunyu said:
I’m planning to convert my Tekno SCT410 2.0 from 12mm hex hubs to 17mm hex hubs so I can use a different set of wheels. Other than TKR5569, TKR9588, and the set screws, are there any additional parts I need to purchase for this conversion?
Click to expand...
Hi, I have the M2C7017 on the SCT410 2.0. Fit perfectly and everything is needed. However, have +5mm offset.

IMG_0674.webp
 
You must log in or register to reply here.

Similar threads

WoodiE
  • Sticky
How to convert SCT410.3 into a Tekno DB48 desert buggy
2 3
Replies
47
Views
34K
Sergeant82d
Sergeant82d
Ish27
convert a tekno et410.2 to a 1/8 scale buggy?
Replies
2
Views
3K
VRC
V
WoodiE
  • Sticky
How to convert a Tekno EB410 into a Tekno ET410
Replies
4
Views
11K
TNRGarage
T
Ferrebee88
410.3 Well, time to convert this SCT410.3 into a EB48SL
Replies
6
Views
711
Ferrebee88
Ferrebee88

Share this page

Back
Top