48 2.2 Center brace for the 2.2?

[Henrik Holst]

I've read a lot of post on the 2.0 really needing a center brace to handle high jumps and I cannot find any information that this was changed in the 2,2 revision but all the braces that I can see being sold are all marked as 2.0, so does any one know if those braces will also fit the 2.2 or if they are no longer needed? Thinking in particular about the Allracing center brace if any one have any experience with it and the 2.2

 

[Leonoff.A]

It's the same in buggies and truggies, exept models with cd cup like in sct or new mt48 2.0

 

[RCFinger]

The TKR9062B stock plastic brace set is compatible with both 2.0 and 2.2. The Allracing front- center brace just bridges the gap where the plastic ones end, so it "should" fit. I don't have the 2.2 but do have the 2.0 and the Allracing brace, if you want me to measure hole patterns or what-have-you i can.

 

[Henrik Holst]

The TKR9062B stock plastic brace set is compatible with both 2.0 and 2.2. The Allracing front- center brace just bridges the gap where the plastic ones end, so it "should" fit. I don't have the 2.2 but do have the 2.0 and the Allracing brace, if you want me to measure hole patterns or what-have-you i can.

ok that sounds promising, I have not yet even received my 2.2 kit so I don't know the dimensions yet so will get back once I do

 

[RCFinger]

ok that sounds promising, I have not yet even received my 2.2 kit so I don't know the dimensions yet so will get back once I do

My guess is that the difference is in the cutout for the -2mm diffs.

 

[Henrik Holst]

Answering my own question and also for any future person that might have the same question. I've got the Allracing center brace for the 2.0 and it does fit the 2,2 perfectly.

 

[ducatiti]

Quick question but do the ET48 2.2 AND ET48.2 the same center brace and upper steering plate?

https://www.amainhobbies.com/m2c-te...d-aluminum-rear-center-brace-m2c6996/p1534983

https://www.amainhobbies.com/m2c-te...luminum-upper-steering-plate-m2c7000/p1534984

 

[RustyUs]

The ET48 2.0 (left) and ET48 2.2 (right) both use the same TKR9062B rear brace.

The same TKR9104 top plate is used on both ET48 2.0 (left) and ET48 2.2 (right) truggies, but proofreaders forget the top plate part number in the 2.2 manual at step J