Just getting underway, took forever to get here but it was worth the wait. My home track has a open class for both my Sct 410.3 and this new Eb410.2 ( If your going to commit to a track day you might as well make the most of it ?)
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
Congrats, good luck with your build. ?Just getting underway, took forever to get here but it was worth the wait. My home track has a open class for both my Sct 410.3 and this new Eb410.2 ( If your going to commit to a track day you might as well make the most of it ?)
K that was supposed to 1 picture ?I would have preferred a bit of room, and shims for the diff case....bit on the tight side. Check out the pic of rubbing on the inside of the case to see what I mean. View attachment 4395View attachment 4395View attachment 4395
Sure did bud.Did you back off the two bottom screws to the bulkhead cover a 1/4 turn?
I just finished up a MT410 build last week. Such a great build and like you with plenty of time and boredom looking forward to the next one. Waiting for the the EB48 2.0 to come back in stock unless Tekno has something new coming out this summer. I just picked a barely used EB410.2 carpet racer to tinker with. Two shocks were a little mushy and found out it one was missing the rubber seal on the shock caps and the other shock shaft came unscrewed because builder did not use lock tight. Seal and shock fluid should be here this week so I was looking over the instruction manual getting familiar with the car. Also got some Bandito street wheels coming in.View attachment 4409While I’m showcasing my boredom .... made this sweat radio case from an old DeWalt drill / driver set. Full foam inside custom fit for my spectrum radio and fab’d up a cover to protect the wheel ( which was thicker than the case) Sorry it’s sideways .... can’t get it to flip.
I hear you lfti! It took 45 days for me to get this kit. The only good part was that I ordered most of what I needed from the same place and it shipped together.have had a EB48 2.0 on order for several weeks. Not arrived yet!!!! Arghhh!
I spoke with two different people at both Horizon hobby and Tower hobby and they said most likely June or July for these to come back in stock. One said she would be surprised if they got them before July.have had a EB48 2.0 on order for several weeks. Not arrived yet!!!! Arghhh!
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!