- Messages
- 119
- Reaction score
- 138
- Tekno RC's
- ET48
- MT410
- Driving Style
- Basher
- Thread starter
- #21
That looks like a great solution, thanks for sharing! There's not as much clearance between the chassis and the motor on the 2.0. Maybe 2mm versus like 6mm on the .3 platform but I think I can make this work.I use this on my builds that run a long TP4070.
https://www.ebay.com/itm/332787511241
Trim off the CD mount from it and then mount it on the rear of the motor. You will need transfer screws to mark your hole locations on the chassis. No matter what the landing is the motor will not move.