Well I’ll be honest it’s been over 12 months since I looked at building an ET48, plans changed but I’ve gone full circle and now have an ET48 2.0 arriving tomorrow
I have an X-Maxx powered by an XLX2 and 1100kv 2028 so that’s my all out basher build, the ET48 is going to be along the lines of an overpower race truggy, so half way house between racing and Overkill’s creations, want to be able to race around a couple of our local tracks while still having a blast down the local park.
This is what I have here or on order
ET48 2.0
Orange springs
Hardened spur gear
TiNi shock shafts
Alum servo horn
Lunsford Ti turn buckles
Parts bin has most of the stock bearings in Boca hybrid yellow seals and a decent majority of the screws in Lunsford Ti
A choice of these servo’s
Futaba CB-700
Futaba CT-700
No ESC/motor selected yet and I’m in two minds on
race spec
Tekin RX8 and T8 2000kv truggy motor
basher spec
Castle MMX8s and 1520 1650kv
So that’s were I’m at
Any more knowledgeable members want to throw some ideas in go ahead
For reference I’ve spoken M2C, T-bone and MMM about future parts, so will be upgrading as it goes
I have an X-Maxx powered by an XLX2 and 1100kv 2028 so that’s my all out basher build, the ET48 is going to be along the lines of an overpower race truggy, so half way house between racing and Overkill’s creations, want to be able to race around a couple of our local tracks while still having a blast down the local park.
This is what I have here or on order
ET48 2.0
Orange springs
Hardened spur gear
TiNi shock shafts
Alum servo horn
Lunsford Ti turn buckles
Parts bin has most of the stock bearings in Boca hybrid yellow seals and a decent majority of the screws in Lunsford Ti
A choice of these servo’s
Futaba CB-700
Futaba CT-700
No ESC/motor selected yet and I’m in two minds on
race spec
Tekin RX8 and T8 2000kv truggy motor
basher spec
Castle MMX8s and 1520 1650kv
So that’s were I’m at
Any more knowledgeable members want to throw some ideas in go ahead
For reference I’ve spoken M2C, T-bone and MMM about future parts, so will be upgrading as it goes