Building the et48 2.0. On the front end the steering is binding with the 5075 coupler. When I steer left or right it the steering engages the coupler. Will try and attach pic. Thanks for the help.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
Is it possible for you to check the depth of the bellcrank posts cutouts? It should be a depth of 1mm. Also try checking the flange on the bottom of the post, it should be 2.5mm.Ifti,
I am actually following your original build thread for my build. Have disassembled and reassembled the steering system twice to no avail. Maybe it's a systemic problem with this version. I would prefer not to limit steering throw. If Tekno is unable to provide a fix or advise if I have done something incorrectly am considering taking a dremel to both arms. Thanks.
Removed the linkage completly. It appears it wasn't binding due to the linkage. As you will see in the vid, when I turn the steering the coupler turns?? Any thoughts? Thanks. It appears I can't upload a .mov file.Strange - your B block does look closer to the chassis then mine, yet my steering assembly now clears the outdrive.......
Here is link to video
Video is set to private - change it to 'unlisted' (won't be searchable on YouTube but will be viewable here......)
I think you have your CV's assembled incorrectly. Make sure that the pin goes through the slot in the driveshaft and through the hole in the barrel.
Here's a pic, I've highlighted the barrel in blue.
View attachment 7001
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!