quadcells
Well-known member
Would a Pro-Line 3530-17 Pre-Cut Brute Clear Body : E-REVO fit a MT410? I like the style of that body.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
No probably not. If you like the race truggy look you can get a proline brute body uncut for the Kraton for $30 and chop down the back to fitWould a Pro-Line 3530-17 Pre-Cut Brute Clear Body : E-REVO fit a MT410? I like the style of that body.
I mounted an E-Revo V1 roll cage from VG Racing on my MT-410. It fits fine after figuring out how to mount it, that is, similarly to the E-Revo body you adapted to your MT-410. Don't remember the wheelbase being an issue as it lined up well enough as I recall.I went ahead and bought a Proline Pre-cut Clear Brute body for the Revo 2.0 . I modified the body post mounts and only needed to cut a little off the rear of the body. I'll post pictures soon.
Wheelbase of MT410 is the same as e-revo. Mounting points are different and will require a bit of trimming and drilling.I mounted an E-Revo V1 roll cage from VG Racing on my MT-410. It fits fine after figuring out how to mount it, that is, similarly to the E-Revo body you adapted to your MT-410. Don't remember the wheelbase being an issue as it lined up well enough as I recall.
Trimming and drilling on the body I assume? Don't have to change the truck itself right?Wheelbase of MT410 is the same as e-revo. Mounting points are different and will require a bit of trimming and drilling.
Would love to see pictures of this please.I mounted an E-Revo V1 roll cage from VG Racing on my MT-410. It fits fine after figuring out how to mount it, that is, similarly to the E-Revo body you adapted to your MT-410. Don't remember the wheelbase being an issue as it lined up well enough as I recall.
Below is a link to the finalized design. The first version was a static mount that didn't allow for the cage to be easily removed or pivot out of the way, and was also printed in PLA, which sustained damage on the first thing the truck hit. I used TPU for the subsequent designs. It's a much more flexible and impact tolerant plastic.Would love to see pictures of this please.
Great idea. Is this the cage? https://www.vgracing.com/product/E-REVO_1-16_Roll_Cage.html It looks a little different than the one in your pictures but I can't tell for sure. Would you be willing to fab and sell me the mounts? I don't have a 3dprinter or know anyone that does.Below is a link to the finalized design. The first version was a static mount that didn't allow for the cage to be easily removed or pivot out of the way, and was also printed in PLA, which sustained damage on the first thing the truck hit. I used TPU for the subsequent designs. It's a much more flexible and impact tolerant plastic.
VG Racing roll cage mounts
And yes, I think Nicochau was referring to trimming/drilling on the body.
That is a very clean fad paint job ??I finished the paint job on the Brute on the MT410View attachment 5804View attachment 5805View attachment 5806View attachment 5807
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!