• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

What kind of EB48 have I

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

error414

Member
Messages
22
Reaction score
3
Hey Guys,

I'm lost with my EB48, I bought EB48 from second hand and I wanted to replace broken parts, omg I ordered so many wrong parts because my tekno is so diferent.


1) diferent arms
rear arms for EB48.4 have number TKR8184 and front arms TKR8286. My arms are diferent

Front:
1602533677228.png


Rears:
1602533715168.png


I tried to find those arms in tekno eshop, without success :(

2) diferent hinge pin brace
I have oval version, in manual is square
1602533952578.png


3) shocks
I have completely different shocks. I bought shafts for shocks, front TKR6017 (122mm) and rear TKR6061 (137mm), but my shocks seem to be smaller. I have 122mm in rear and I have no idea what is in front, I would say 107mm because these smaller shocks are assembled in EB48SL.

1602534175116.png

1602534216930.png

Next diference is shock boots, I have those with "waves", original ones are flat.

And diferent rubber


1602534372110.png


and diferent spacers
1602534522502.png


1602534673489.png


It seems I have shocks from another car :(.

4) center diff house
Original house is from 4 metal pieces, I have only two pieces and more holes for screws on side, so I printed cover from nylon, but I can't find number of parts for my version.
1602534828851.png
 

Attachments

  • 1602533926405.png
    1602533926405.png
    702.9 KB · Views: 178
  • 1602534741860.png
    1602534741860.png
    855 KB · Views: 151
Thank you very muchm you saved me, I didn't find that car in menu. It seems it's quite old car
1602536929706.png
 
Chrome. You are right, eb48.2 is in parts menu, but no in vehicles menu for download manual. Thank you very much for manual

1602539736987.png
 
What canopy mount do you use, it sounds promising, original canopy is too small and it's not possible to install fan for motor.
 
Here is a link to the .2 manual if you didn't have it. https://www.teknorc.com/wp-content/uploads/2013/09/EB48.2instructions.pdf

The eb48 only recently change the chassis design so any body that fits from the .4 generation or earlier should fit. I haven't felt the need to run a fan honestly. I used to run the JConcepts "finisher" body (on my .3) and that one seemed to have lots of room underneath, but again I never used a fan so I couldn't say for sure f one would fit under that body or not.
 
Batteries < 120 :) I don't believe :). My motor had max 80 , I would like to reduce it because manipulation with car with hot motor hurts :D.
 
Here is a link to the .2 manual if you didn't have it. https://www.teknorc.com/wp-content/uploads/2013/09/EB48.2instructions.pdf

The eb48 only recently change the chassis design so any body that fits from the .4 generation or earlier should fit. I haven't felt the need to run a fan honestly. I used to run the JConcepts "finisher" body (on my .3) and that one seemed to have lots of room underneath, but again I never used a fan so I couldn't say for sure f one would fit under that body or not.
Is canopy from JConcept transparent or painted? https://www.jconcepts.net/shop/s15-tekno-eb48-20-body There is word "clean" in description so I would say it's transparent. It's possible to buy painted canopy for Eb48 somewhere?
 
What canopy mount do you use, it sounds promising, original canopy is too small and it's not possible to install fan for motor.
The .2 has the towers of the MT410. You can buy the body posts of the MT410 and very easily adapt any SCT or GT body of the market.

my EB48.2:
ADD5B84E-57BF-4E64-9B3A-058D8086FA85.png
 

Recent Popular Liked

Back
Top