Is this going to be a problem?

[Cheez]

While waiting for shock upgrades I’m checking out fitment, nothing buttoned up yet. I’m looking at the shaft on my xerun 3660 3200 kv and it looks to be short. The pinion would have to be at the very end of the shaft. Is this a problem or am I getting ahead of myself?

 

[Billl DeLong]

try sliding the motor plate into the mount, should be a perfect fit when all parts are used

*** Be sure to use the upper hole (on the motor plate) if you be racing off-road, more info here:
https://www.teknoforums.com/threads/build-review-eb48-2-0.1864/

Good Luck!

 

[Cheez]

Thank you sir for your reply. As I mentioned,I’m just kind of loosely fitting things together. I’m a little retentive about opening a bag before it’s time , so have not busted out the motor plate yet. But did go to the mailbox and got my Tekno pinion and feel a little more comfortable now.

 

[Billl DeLong]

Here's a pic with a 3660 motor in my SCT410, it fits:
https://www.teknoforums.com/threads/build-review-sct410-3.1389/post-11819

 

[Cheez]

Here's a pic with a 3660 motor in my SCT410, it fits:
https://www.teknoforums.com/threads/build-review-sct410-3.1389/post-11819

Thank you