• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

48.3 ET48 2.0 basher bumper mod

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Lynny

Well-known member
Messages
99
Reaction score
121
Location
SE PA
Tekno RC's
  1. EB48
  2. ET48
Driving Style
Basher
Adapted a RPM arrma kraton bumper to my new et 48 2.0 very easy to do. You will need a 3mm tap two m4 by 22 flathead screws the rear center hole is drilled and tapped into the chassis.
A9C411A5-1804-489A-89D4-A003F5C6D89F.jpeg
1BE24456-8D40-479C-AEBA-849350393D89.jpeg
image.jpg
image.jpg
 
Wish I was confident enough to try that myself.
It’s very easy I will be doing a build thread in the next few days and explain it in detail so anyone can do it. Are you getting the 2.0
 
Yes, I have a ET48 2.0 on order it just hasn't arrived yet. I look forward to seeing your build thread.
Awesome you’re gonna love it. The biggest thing to watch out for is installing the rear bulkhead to chassis mounting screws TKR1346 they get very tight use chapstick on threads and work them in and out as you go or you will round out the hex head.
image.jpg
 

Lynny can you please post a pic with the wheels on it when done. I like that front bash bumper. I have it on my mt410, like to see how it looks on the et with wheels. thanks bro.​

 

Lynny can you please post a pic with the wheels on it when done. I like that front bash bumper. I have it on my mt410, like to see how it looks on the et with wheels. thanks bro.​

Look under my build thread pics there
 
You and me both!!! lol

The bumper looks awesome!
Thanks bud I explained it thoroughly in my build thread it is really easy to do.
 
Lynny, your ET48 looks awesome!

I did mine using T-Bone ET48.3 bumpers and wheelie bar.
Bolts layout was totally different. Drilled and dremel some.

330924BF-F874-47B4-95E1-11209F6A33C3.jpeg


Front
38B7EF0F-2ECF-4067-8089-DD815E5DF1AC.jpeg


Rear
1034419D-FE51-44D8-BFA3-12BCA576D67E.jpeg


Adapted
899FD58D-B010-4EAE-8936-188C99B8E479.jpeg

F2D02153-D245-4DB1-A881-32DEBCE3C5F1.jpeg

8B75DAC4-F95C-4B8F-8C9A-5CEB303DDE55.jpeg

D5009E6D-80D5-45A3-B674-A6FE25853B7B.jpeg


Hope T-Bone makes stuffs for 2.0 soon.
 
Last edited:
Lynny, your ET48 looks awesome!

I did mine using T-Bone ET48.3 bumpers and wheelie bar.
Bolts layout was totally different. Drilled and dremel some.

View attachment 6700

Front
View attachment 6701

Rear
View attachment 6702

Adapted
View attachment 6703
View attachment 6704
View attachment 6705
View attachment 6706

Hope T-Bone makes stuffs for 2.0 soon.
You did a nice job on the car and the bumper mod looks good glad to see someone using there head and hands to get what they need.
 
I just re-purposed an old Arrma bumper this afternoon then I found this thread, you guys did a fantastic job, well done! Mine is pretty poorly executed, but will do the job for now. I have loads of them lying around so I can try and do a better job with the next one.

20210702_203543.jpg
20210702_203343.jpg
20210702_203319.jpg
 
Lynny, your ET48 looks awesome!

I did mine using T-Bone ET48.3 bumpers and wheelie bar.
Bolts layout was totally different. Drilled and dremel some.

View attachment 6700

Front
View attachment 6701

Rear
View attachment 6702

Adapted
View attachment 6703
View attachment 6704
View attachment 6705
View attachment 6706

Hope T-Bone makes stuffs for 2.0 soon.
Awesome job. Do you have the part number, I’m searching t bone and they have a lot differents ones.
does it hold well the bad landings?
Thanks
 
Awesome job. Do you have the part number, I’m searching t bone and they have a lot differents ones.
does it hold well the bad landings?
Thanks

Yes. it holds good.
But you’ll need longer bolts to install them. Longer 5mm each than stock bolts.

T-bone part number: 57007, 57010
 
Can you post kraton bumper part numbers? The ones I'm finding don't look like this. They look smaller.
image.jpg

You can use 81812 or the older 81472 these are both rpm part numbers. If you look at my build thread et48 2.0 Basher build I layed it out step by step it’s really easy to do. If you do use this bumper get some 4by25 flat head screws to hold the front cover on the kit 4by20 don’t have much holding power.
 
I just re-purposed an old Arrma bumper this afternoon then I found this thread, you guys did a fantastic job, well done! Mine is pretty poorly executed, but will do the job for now. I have loads of them lying around so I can try and do a better job with the next one.

View attachment 7147View attachment 7148View attachment 7149
How is your ESC's placement doing? I'll have to do the same thing on mine. The TP 4070 is waaaayyy too long lol
 

Recent Popular Liked

Back
Top