cAn”t DrIv3 4 sH!t cOol
Well-known member
- Messages
- 65
- Reaction score
- 35
All done with converting the front and rear .4 swap and added the lunsford turnbuckles. Added the .4 shocks to the front.also added split center diff
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
.3 armsare those 2.0 hubs on .4 arms? Nice work boss!
edit : ahh i see its .4 setup, exotek hubs.. may grab em as well for my .4!
I run tomorrow...thx for pointing that out a whole extra for this modeIf you're running the .4 rear hubs with the .2 rear arms you need to also run the wide pivot C and D blocks from the .4. If you don't the driveshafts are going to hit the outdrives during the suspension cycle.
I did for a few sec. Ran It on 6s mmx setup poop slid under a car and snap tower, hinge pin amd more all fixed now ill postHave u gotten her out to compare the difference
I checked it out my .3 driveshafts are to far into the .3 outdrive cupI didn't use the.4 driveshafts fk i got back to hobbyshop.I run tomorrow...thx for pointing that out a whole extra for this mode
yeah car runs great wheels kinda cock eyed lol and the turning is much better it definitely took out the wobbly or slope that I was havingHave u gotten her out to compare the difference
The driveshafts between the .3 and the .4 are the same length. The problem is that the .4 rear hubs have the lower pin further out from center (closer to the wheel) than the previous versions. Since the arms are all the same length you need to use the .4's wider C and D blocks to get the track width back to the correct spot.I checked it out my .3 driveshafts are to far into the .3 outdrive cupI didn't use the.4 driveshafts fk i got back to hobbyshop.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!