Battery size

[Acontisr]

Advice for batteries 4s and 6s especially that fit this small tray?

 

[HulkRC]

Advice for batteries 4s and 6s especially that fit this small tray?

Match the dims of the tray vs the dims of the batteries.

 

[RCFinger]

Battery length is the problem you will face the most, 140mm maximum, width and height are not so much of an issue but always double check. Most "Hardcases" will fit as they seem to conform to a more race standard.

I have some of these 4s, they're ok..

https://gensacearespammers.de/colle...60c-4s1p-hardcase-lipo-battery-with-xt90-plug

6s of the same range, also ok..

https://gensacearespammers.de/colle...s1p-22-2v-60c-hardcase-rc-car-lipo-battery-14

I have these Turnigy ones too, they are also ok but were a third the price of the Gens ace and probably just as ok.

https://hobbyking.com/en_us/turnigy...ery-pack-w-xt90-connector.html?___store=en_us

Depending on where you are you could look at SMC in the US or ONYX in the UK, they are some of the best you can get outside of the racing scene, which is its own world and max of 4s anyway. My Onyx OPS 6200mah 6s honestly feel like 7s, you can feel the quality!

 

[Acontisr]

Thank you . The 6s is more of the problem. Will check it out. Just finished the build and didn’t realize how small the tray is.

 

[RCFinger]

Thank you . The 6s is more of the problem. Will check it out. Just finished the build and didn’t realize how small the tray is.

Yea it is a bit of squeeze but, it does stop you from putting any old 6s Lipo and sending it. This keeps the light and racy feel that is at the core of all Tekno vehicles!