• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

48 2.2 battery for the NB48-2.2

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Kozzy

Premium Member
Supporting Member
Messages
9
Reaction score
6
Hello all,

I'm looking for a battery that when inserted there are no wires sticking out.
The size I need much be: 53mm x 29mm x 29.5 mm at max

IMG_3493.webp


I only have a single "MuchMore" Impact RX 2400mAh which matches these dimensions, which I don't think they make anymore.
The Reedy 2700mAh is: 56.5 x 31.4 x 29.9 which is too big, as there is no place to insert the switch + balance wires.

Which batteries are you rolling with ?
 
Hello everyone, this still seems to be an issue. so far I already ordered two brands of batteries, that on paper should fit but they don't.

Can someone share which battery brand and model you use ?
Thank you
 
If you haven't found your receiver battery yet, I ordered this one. Fits just right.

ProTek RC LiPo Hump/Short Receiver Battery Pack (Kyosho/Tekno) (7.4V/2600mAh) (w/Balancer Plug)​

 
Tekin also makes a battery specifically for the Tekno 2.X line of vehicles.
One thing most people do is have the balance port sticking out on purpose so they can easily charge the pack while keeping it installed in the car.
 
Tekin also makes a battery specifically for the Tekno 2.X line of vehicles.
One thing most people do is have the balance port sticking out on purpose so they can easily charge the pack while keeping it installed in the car.
Yes,
That is what I eventually done too.
 
Back
Top