410 2.0 Longer body mount posts

[Henrik Holst]

Built my MT410 2.0 a week ago but noticed that the stock body mounts are far too low for the sturdy basher bodies out there to fit, does any one know of a replacement posts that fits the 2.0 and that are longer than stock? Tried to look around at Amazon and AliExpress but since practically zero of them show the dimensions (or if the mounting holes are m3 or not) it is really hard to find anything.

 

[HulkRC]

Contact Basher Bodies or JS Parts direct. JS Parts makes 3D printed longer body posts that fit the thick 4mm basher bodies.

 

[Henrik Holst]

Contact Basher Bodies or JS Parts direct. JS Parts makes 3D printed longer body posts that fit the thick 4mm basher bodies.

thanks, will do.

 

[RC-Steve]

This was on an Arrma not a Tekno but drilling out the body clips hole an additional millimeter made the difference.

 

[Henrik Holst]

Contact Basher Bodies or JS Parts direct. JS Parts makes 3D printed longer body posts that fit the thick 4mm basher bodies.

Btw, I did reach out to Basher and got the JS Parts longer body mounts. Not only did they work perfectly, they are also softer than the original so will not stay bent like the stock ones does in a crash.

 

[HulkRC]

Btw, I did reach out to Basher and got the JS Parts longer body mounts. Not only did they work perfectly, they are also softer than the original so will not stay bent like the stock ones does in a crash.

Good to know they work perfectly. You got yours before mine which is still on the slow boat from China, lol. Hopefully they last and can withstand the abuse by bashers.