Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
Awesome you’re gonna love it. The biggest thing to watch out for is installing the rear bulkhead to chassis mounting screws TKR1346 they get very tight use chapstick on threads and work them in and out as you go or you will round out the hex head.Yes, I have a ET48 2.0 on order it just hasn't arrived yet. I look forward to seeing your build thread.
You and me both!!! lolWish I was confident enough to try that myself.
You did a nice job on the car and the bumper mod looks good glad to see someone using there head and hands to get what they need.Lynny, your ET48 looks awesome!
I did mine using T-Bone ET48.3 bumpers and wheelie bar.
Bolts layout was totally different. Drilled and dremel some.
View attachment 6700
Front
View attachment 6701
Rear
View attachment 6702
Adapted
View attachment 6703
View attachment 6704
View attachment 6705
View attachment 6706
Hope T-Bone makes stuffs for 2.0 soon.
Awesome job. Do you have the part number, I’m searching t bone and they have a lot differents ones.Lynny, your ET48 looks awesome!
I did mine using T-Bone ET48.3 bumpers and wheelie bar.
Bolts layout was totally different. Drilled and dremel some.
View attachment 6700
Front
View attachment 6701
Rear
View attachment 6702
Adapted
View attachment 6703
View attachment 6704
View attachment 6705
View attachment 6706
Hope T-Bone makes stuffs for 2.0 soon.
Awesome job. Do you have the part number, I’m searching t bone and they have a lot differents ones.
does it hold well the bad landings?
Thanks
I mean, the wheelie part numberYes. it holds good.
But you’ll need longer bolts to install them. Longer 5mm each than stock bolts.
T-bone part number: 57007, 57010
Wheelie bar is 96027I mean, the wheelie part number
Can you post kraton bumper part numbers? The ones I'm finding don't look like this. They look smaller.Adapted a RPM arrma kraton bumper to my new et 48 2.0 very easy to do. You will need a 3mm tap two m4 by 22 flathead screws the rear center hole is drilled and tapped into the chassis.View attachment 6579View attachment 6580View attachment 6581View attachment 6582
Can you post kraton bumper part numbers? The ones I'm finding don't look like this. They look smaller.
How is your ESC's placement doing? I'll have to do the same thing on mine. The TP 4070 is waaaayyy too long lolI just re-purposed an old Arrma bumper this afternoon then I found this thread, you guys did a fantastic job, well done! Mine is pretty poorly executed, but will do the job for now. I have loads of them lying around so I can try and do a better job with the next one.
View attachment 7147View attachment 7148View attachment 7149
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!