Hi,
I'm new to RC cars and just bought a second hand Tekno 48.4 with engine: XERUN 4268 G2 and XERUN XR8 SCR as controller.
It run perfect for one day and it suddenly stopped.
When I now try to run it a again the engine will not run, only after several times using the throttle it wil start.
I already calibrated the throttle but it does not change anything.
When I connect the battery and turn it on the led of the controller blinks 4 times (I use a 4S battery) and the led is off.
When I then use the throttle the led blinks red and the enige knocks a bit.
Sometimes when I turn the axle of the engine it will start.
When it is started/runs it will keep on running perfect (I believe, I just tried for a few minutes a few times) until I turn the controller off and on again.
I also believe the engine becomes really hot while it is almost not used, also the cables become hot.
Do you have an idea what could be wrong or what I do wrong?
Thanks.
I'm new to RC cars and just bought a second hand Tekno 48.4 with engine: XERUN 4268 G2 and XERUN XR8 SCR as controller.
It run perfect for one day and it suddenly stopped.
When I now try to run it a again the engine will not run, only after several times using the throttle it wil start.
I already calibrated the throttle but it does not change anything.
When I connect the battery and turn it on the led of the controller blinks 4 times (I use a 4S battery) and the led is off.
When I then use the throttle the led blinks red and the enige knocks a bit.
Sometimes when I turn the axle of the engine it will start.
When it is started/runs it will keep on running perfect (I believe, I just tried for a few minutes a few times) until I turn the controller off and on again.
I also believe the engine becomes really hot while it is almost not used, also the cables become hot.
Do you have an idea what could be wrong or what I do wrong?
Thanks.