KitsAreFun
Member
- Messages
- 7
- Reaction score
- 1
aaaand another what to buy thread.
Hallo all,
I will buy a MT410 and need some help buying the thing I need to complete it.
Building the kit should be doable, had a Tamiya Manta Ray and a Losi XXX-T a few years ago.
I will by the stuff in Germany so I might not get all the cool servos you recommend.
I already have some parts picked out that should fit. Am not sure if the more expensive variant is really worth it?
ESC & motor
Castle Monster X & 1515-2220KV
Savöx SB-2290SG
Body
I probably won't put shoe goo in it seems a lot of work
Pro-Line 1972 Chevy C-10
Wheels
Good mix on the ground and while in the air would be nice
What is a must to have?
Not sure probably something that for under $150.
Sorry for probably asking the same questions for the 100th time
Hallo all,
I will buy a MT410 and need some help buying the thing I need to complete it.
Building the kit should be doable, had a Tamiya Manta Ray and a Losi XXX-T a few years ago.
I will by the stuff in Germany so I might not get all the cool servos you recommend.
I already have some parts picked out that should fit. Am not sure if the more expensive variant is really worth it?
ESC & motor
Castle Monster X & 1515-2220KV
- Waterproof
- BEC 8V
- AUX wire to reduce speed when my 7 year old wants to drive over 3rd channel?
- s the B-Link enough or do also need the USB-Link to activate Bluetooth?
- $100 / 100€ more then the EzRun combo
- Waterproof
- BEC only 7.4V
- NO AUX wire or profiles reduce speed
Savöx SB-2290SG
- can I put it on 8V?
- strong buy maybe a little slow
- expensive
- works with up to 8.4V
- not as strong as the Savöx but faster and cheaper
Body
I probably won't put shoe goo in it seems a lot of work
Pro-Line 1972 Chevy C-10
- week spot at the bed where it breaks?
- will also break
Wheels
Good mix on the ground and while in the air would be nice
- Arrma 3.8" Backflip 4S
- Pro-Line Badlands (MX28)
- other wheels?
What is a must to have?
- Bumper front the big one from Oktay
- Bumper rear ???
- Skidplate front & rear from MLine
- Mudgurds read
- Chassis brace rear and/or center do I need them (mostly out of stock I think)
- JS-Parts chassis protection skin probaly not worth it?
- Shock socks?
- what else?
- I have some EDS tools.
- Can i build the kit without the tekno pivot ball and shock multi tool
Not sure probably something that for under $150.
Sorry for probably asking the same questions for the 100th time