I run the .4 steering on my sct410.3's. The new Ackerman is a great upgrade IMO.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
Well, I went to the proline body mounts; i kept loosing pins mid race and this cure that... so I am digging them and Think they are worth it as the Pro4 class just takes a pounding.
This past race i got tangled up and lost two front pins....talk about a parachute... so I finished but not well in that heat..and I was hoping to do better for a better grid spot for the main. A buggy with no rear wing is easier to drive than when the front pins let go on the pro4 lol
it blew me away that the SCT used to come with plastic hinge blocks!
I take this back, I had broken the "C" block as well now...it was a really weird landing and a pipe that I am sure was the main culprit.I have only broken the front "A" block once and then switched it out with an aluminum and haven't had an issue since. IMO if the front one was aluminum then you are good to go.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!