• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

New castle mmx8s 1520 combo

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Mt410dude

Active member
Messages
38
Reaction score
23
New 1520 1650 can this is the mill I have been waiting for. Perfect power for Et48.3 without gearing limitations.

1606839558617.png
 
Good luck getting it to fit that ESC is huge!
I think that motor is about 1/2" longer than the 1515 can also.

I hate to be a dream crusher and I hope to be proven wrong but I have a hard time seeing that combo fitting.
 
New 1520 1650 can this is the mill I have been waiting for. Perfect power for Et48.3 without gearing limitations.

View attachment 5784
I as well like to be bigger and better than the next guy from harleys to pickup trucks. But this set up in a ET is crazy ?

what kind of driving do you plan to do with this set up. I would be afraid you would send it into orbit off of a big jump??☄️

I have a 1515 can with a MMX and she rips. I barely have enough room for my sensor cable.

if you do manage to shoehorn this set up into your rig keep us posted on what all you break/upgrade to support all this power?
FD52D0CE-2663-4790-B38D-F5D2DFCEE8C3.jpeg
 
Sounds good you should never have any heat issues this way as long as your pinion is a reasonable size

Amain does run some good holiday sales may see if this is one of the deals they run in a couple of weeks

they always get some of my $$ on them end of the year sales
 
Well fellas the esc will fit with the m2c plate over the brake servo location, and I plan to ran 5s and 6s my et is converted to a mt with large tires . Will post when complete.
Well there you go then!
 
I love my MMX and 1515/2200 combo, but I too sometimes feel the siren song of 'more'...

I will have to try this one out in something, soon!
 
I love my MMX and 1515/2200 combo, but I too sometimes feel the siren song of 'more'...

I will have to try this one out in something, soon!
I just built an Et48.3 with full M2C wide body and caste 1520 MMX8S combo.
I am going to run 3.8MX badlands. So I am thinking 18 pinion? On 6S
Any thoughts?
Thanks
 
I just built an Et48.3 with full M2C wide body and caste 1520 MMX8S combo.
I am going to run 3.8MX badlands. So I am thinking 18 pinion? On 6S
Any thoughts?
Thanks
18t seems reasonable given the beast of a motor that is pushing it, but again like any new build you should keep temps in check.

Those tires on the other hand are massive!!
 
18t seems reasonable given the beast of a motor that is pushing it, but again like any new build you should keep temps in check.

Those tires on the other hand are massive!!
Here is some progress.
 

Attachments

  • CE7662C6-4C91-491C-95EA-7190DCBA913B.png
    CE7662C6-4C91-491C-95EA-7190DCBA913B.png
    760.1 KB · Views: 369
  • 3DB1E03B-0774-4020-9470-361D20AF0777.jpeg
    3DB1E03B-0774-4020-9470-361D20AF0777.jpeg
    177.6 KB · Views: 376
And a few more before painting!
Thanks
 

Attachments

  • DA16A2FC-0330-4CAE-97B2-EBF6D671E5EF.jpeg
    DA16A2FC-0330-4CAE-97B2-EBF6D671E5EF.jpeg
    117.5 KB · Views: 282
  • 692A709C-5E3E-434D-AD13-6664B03F628F.jpeg
    692A709C-5E3E-434D-AD13-6664B03F628F.jpeg
    98.4 KB · Views: 259
  • C430A20C-FF43-4549-8B6C-615071083257.jpeg
    C430A20C-FF43-4549-8B6C-615071083257.jpeg
    124 KB · Views: 278
  • F296C7D0-1E3B-4D09-BCAF-8A313F4861F2.jpeg
    F296C7D0-1E3B-4D09-BCAF-8A313F4861F2.jpeg
    122.3 KB · Views: 298
Thanks
Body One Complete!

Now it needs a Good Test Drive!
 

Attachments

  • 0CD7D28B-C111-4B19-9184-7531485EDA88.jpeg
    0CD7D28B-C111-4B19-9184-7531485EDA88.jpeg
    121.2 KB · Views: 263
  • 85DDF2E6-FB13-4547-A5F2-9F0E715BD322.jpeg
    85DDF2E6-FB13-4547-A5F2-9F0E715BD322.jpeg
    121 KB · Views: 255
  • B3756AFC-A866-46C2-8962-F77E9B0A36B3.jpeg
    B3756AFC-A866-46C2-8962-F77E9B0A36B3.jpeg
    119.8 KB · Views: 253
  • BE3B2B50-8541-4427-A534-85C643323F43.jpeg
    BE3B2B50-8541-4427-A534-85C643323F43.jpeg
    115.7 KB · Views: 239
Very nice build all around ???

it is clean and looks very professional the clear top to be able to see the electronics is a cool touch ?

get her out and rip it we all want to how it performs with that Coke can for a motor
 
Thank You!
It’s more of a Red Bull Can than a Coke can! LOL
It’s only a 1520.
Still loving the 1520 on 6S 18T
SMC extreme 120C
Running cool .
 

Attachments

  • F1D0840A-5CDF-42EF-AA98-E6E9BA3734D7.png
    F1D0840A-5CDF-42EF-AA98-E6E9BA3734D7.png
    468.5 KB · Views: 232
  • 56DF3DC8-BBA9-4620-88DB-5206DC7EB457.png
    56DF3DC8-BBA9-4620-88DB-5206DC7EB457.png
    595.6 KB · Views: 213
  • 01B8665E-DB0D-4C66-87DD-ACB67944D7F7.png
    01B8665E-DB0D-4C66-87DD-ACB67944D7F7.png
    655 KB · Views: 205

Recent Popular Liked

Back
Top