Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
I as well like to be bigger and better than the next guy from harleys to pickup trucks. But this set up in a ET is crazy ?New 1520 1650 can this is the mill I have been waiting for. Perfect power for Et48.3 without gearing limitations.
View attachment 5784
Well there you go then!Well fellas the esc will fit with the m2c plate over the brake servo location, and I plan to ran 5s and 6s my et is converted to a mt with large tires . Will post when complete.
What size pinion are you running?
I just built an Et48.3 with full M2C wide body and caste 1520 MMX8S combo.I love my MMX and 1515/2200 combo, but I too sometimes feel the siren song of 'more'...
I will have to try this one out in something, soon!
18t seems reasonable given the beast of a motor that is pushing it, but again like any new build you should keep temps in check.I just built an Et48.3 with full M2C wide body and caste 1520 MMX8S combo.
I am going to run 3.8MX badlands. So I am thinking 18 pinion? On 6S
Any thoughts?
Thanks
Here is some progress.18t seems reasonable given the beast of a motor that is pushing it, but again like any new build you should keep temps in check.
Those tires on the other hand are massive!!
15 or 16 toothWhat size pinion are you running?
Nice set up!
Still loving the 1520 on 6S 18TThank You!
It’s more of a Red Bull Can than a Coke can! LOL
It’s only a 1520.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!