Hobbywing XR8 LED Solid Red

[MIKE KING]

Need some help ..my xr8 g2 suddenly stop working as a few run

LED turn solid red...as i try to calibrate..it wont respond...try to connect to OTA..also it said not parameter not uploaded

FYI...im using 2200kv motor and 16-44 ratio

what seems to be the problem..TIA

 

[Billl DeLong]

I've had a similar problem with HW, they suddenly go bad after a hard chassis slap

After you replace the ESC, I highly recommend installing a shock absorbent foam pad under the ESC.

I use this product here:
https://www.amazon.com/gp/product/B071GD8TG9/

I use a thick CA glue with 1 coat of CA on the self adhesive side, and 2 coats of CA on the porous side.

 

[MIKE KING]

I've had a similar problem with HW, they suddenly go bad after a hard chassis slap

After you replace the ESC, I highly recommend installing a shock absorbent foam pad under the ESC.

I use this product here:
https://www.amazon.com/gp/product/B071GD8TG9/

I use a thick CA glue with 1 coat of CA on the self adhesive side, and 2 coats of CA on the porous side.

means here the ESC itself is blown?...

 

[Billl DeLong]

Contact HW and fill out an RMA, they'll give you a deep discount for a replacement, just be sure to use that soft pad to absorb the shock on the replacement ESC so it may last longer