Cgoldsmith2
Member
Hello! I’ve posted one question here before and got some great help. I am fairly new to RC and I love it! I took the Et48 out to El Nido this morning for the first real run and it was a blast. Track was moist still and lots of big puddles so I couldn’t really do any laps but man it’s so much fun to drive and can’t wait to really run this. I am definitely keen on racing this and not bashing. I have some traxxas stuff I like to use for that with my kids.
Anyway for the electronics I went with the Tekin setup with the 2000kv motor and RX8. Protek170SBL servo and a futaba radio system T 4pm plus. Tossed in the 17t pinion to start with. I have buckshots on it but I also have a set of backflips as well. The chassis is mostly all stock settings except I reduced the front toe a bit to -1. I think out of the box it was closer to -3 degrees
I know there is a group that meets on Saturdays at around noon at El Nido. But I alwso wanted to reach out about other tracks and racing ops? I know there is a track in Santa Clarita I plan to go to but if there are other groups around or places I wouldn love to check it out! We live in Koreatown so I know most things will be a bit of a drive and that’s fine.
I’ve also been getting into the mini z stuff at the shop up the road.
Would love to meet some folks out here!
Here are some pictures of the build before I got it dirty!
Thank you!!!
Anyway for the electronics I went with the Tekin setup with the 2000kv motor and RX8. Protek170SBL servo and a futaba radio system T 4pm plus. Tossed in the 17t pinion to start with. I have buckshots on it but I also have a set of backflips as well. The chassis is mostly all stock settings except I reduced the front toe a bit to -1. I think out of the box it was closer to -3 degrees
I know there is a group that meets on Saturdays at around noon at El Nido. But I alwso wanted to reach out about other tracks and racing ops? I know there is a track in Santa Clarita I plan to go to but if there are other groups around or places I wouldn love to check it out! We live in Koreatown so I know most things will be a bit of a drive and that’s fine.
I’ve also been getting into the mini z stuff at the shop up the road.
Would love to meet some folks out here!
Here are some pictures of the build before I got it dirty!
Thank you!!!
Attachments
-
3C64CD7B-8C6C-4630-8133-28A5E2D6C8DF.jpeg197.7 KB · Views: 81
-
3D0D9A7B-C842-47AF-A41B-BC1B713AB25D.jpeg181.3 KB · Views: 73
-
F9C81823-9A06-41E2-9687-F5817C89A293.jpeg195.7 KB · Views: 88
-
15A22C76-05A0-4C4F-82D9-8C89BFAE4E4E.jpeg115.7 KB · Views: 90
-
EB5635DD-784F-48E7-B6E0-2E4F1F4514BB.jpeg114.1 KB · Views: 93