For those that own the ET410.2, and running on loose surfaces, are you moving the rear shocks to the rear of the arms/tower like that of the original ET410?
-
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
ET410.2 Rear Mounted Shocks On Rear Arms/Tower
- Thread starter RustyUs
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Thread starter
- #2
Not worrying about the anti sway bar arrangement, but is moving the rear shocks to the rear of the arms/tower just as simple as buying the ET410 TKR7224 rear arms, and reaming out the inner hinge pin holes?
- Thread starter
- #3
Thanks to Kevin... "Yes (it is as simple as using original ET410 arms on the ET410.2 and reaming out the inner hinge pin holes to 3.5mm). It's a common mod that we do at our local track. 99% of us have done it. A lot of guys will also put the old hubs on too. I bought the exotec aluminum hubs for the 410."
- Messages
- 300
- Reaction score
- 389
TKR7224B are the arms you want. The inner pin hole has been adjusted to 3.5mm.
