• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

ET410.2 Rear Mounted Shocks On Rear Arms/Tower

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

RustyUs

Well-known member
Build Thread Contributor
Messages
506
Reaction score
311
Location
central PA
Tekno RC's
  1. EB48
  2. ET410
  3. SCT410
For those that own the ET410.2, and running on loose surfaces, are you moving the rear shocks to the rear of the arms/tower like that of the original ET410?
 
Not worrying about the anti sway bar arrangement, but is moving the rear shocks to the rear of the arms/tower just as simple as buying the ET410 TKR7224 rear arms, and reaming out the inner hinge pin holes?
 
Thanks to Kevin... "Yes (it is as simple as using original ET410 arms on the ET410.2 and reaming out the inner hinge pin holes to 3.5mm). It's a common mod that we do at our local track. 99% of us have done it. A lot of guys will also put the old hubs on too. I bought the exotec aluminum hubs for the 410."
 

Recent Popular Liked

Back
Top