KnowAir
Well-known member
- Messages
- 199
- Reaction score
- 167
- Tekno RC's
- MT410
- SCT410
- Driving Style
- Basher
I've found on several EXB diffs from Arrma where the diff gasket had been "ingested" by the LSD star/friction plates?.. only thing I can come up with. I never had the diff apart, bought it new, but no gasket evident? Then, after removing all the internal gears..there it is!! All chewed to a pulp by the gears!?I’ve had this problem with my tekno diffs. How I think I’ve remedied the problem was less fluid, even tightened and not over tightening. I have an arrma 6s that that was a problem on and didn’t have anymore diff gaskets and wanted to run. So, I used some silicon gasket maker and haven’t had the problem yet. Now I don’t use gaskets on my arrma. When I run out of gaskets for the teknos I will do the same. BTW, I mostly bash so I’m not getting into my diffs multiple times a week. Or however Many times racers take apart their diffs.
@Hector_Fisher any more on the Tekno diffs?