Rumpelhardt
New member
- Messages
- 4
- Reaction score
- 5
Ok here goes. Got a SCT410 used ebay special roller on the way. Plan is to build a desert buggy using a Losi Tenacity DB cage and body. I have two possibilities for power. Castle Monster X/Holmes Hobbies 3500 kv Puller Pro XL (10mm longer than a standard 540 size motor)_which is what I was originally set on. I am having second thoughts on this because of space. Second is a Mamba X/ Holmes 3500 kv Puller Pro standard size 540 can, ether of which will be run on 3s.
Some questions I have are, Will the Monster X/ Puller Pro XL fit and how hard will the Losi Tenacity DB cage and body be to adapt to the chassis? I am also planning on upgrading to 17mm hex's. I hate having to tighten wheel nuts every 5 seconds. That looks to be pretty straight forward.
This is of course strictly a basher.
Thanks for your time.
Some questions I have are, Will the Monster X/ Puller Pro XL fit and how hard will the Losi Tenacity DB cage and body be to adapt to the chassis? I am also planning on upgrading to 17mm hex's. I hate having to tighten wheel nuts every 5 seconds. That looks to be pretty straight forward.
This is of course strictly a basher.
Thanks for your time.