Tekno ET 48. 2.2

[AugustaGeorgia706]

What’s the best electronics for this buggy 2.2 version for the race track. This will be my first build thanks. How is the build for first time builders as far as instructions. I have about $500 for electronics ie motor, esc, survo. Thanks

 

[Billl DeLong]

If I were to build a new kit for myself I would select these components:

HobbyWing Combo with 4274-2250KV motor:
https://www.hobbywingdirect.com/col...r8-plus-g2s-combo-2-6s?variant=39898595459187

Eco Power WP250T:
https://bdrca.blogspot.com/2024/08/which-servo-is-best.html


TEKNO instructions are great, I have build thread here based on the 2.0 buggy, but it includes tips that will be universal to your build as well have fun!

Thread 'BUILD/REVIEW EB48 2.0'

Sep 7, 2020

*** IMPORTANT UPDATE ****

I am no longer maintaining this thread, I have sold this car and have chosen to move over to the following platform:
https://www.rcgroups.com/forums/showthread.php?3855991-BUILD-REVIEW-HB-Racing-E8T-evo3

Although this thread will be targeted for club racing, I expect a lot of this information may be useful for bashers as well. I am a club racer who has been a basher since 1986 and got into club racing around 2010.

I have about 4 years of experience racing the EB48.3 and EB48.4...

• Billl DeLong
• Replies: 109
• Forum: EB48

• 
• 

 

[RCFinger]

If I were to build a new kit for myself I would select these components:

HobbyWing Combo with 4274-2250KV motor:
https://www.hobbywingdirect.com/col...r8-plus-g2s-combo-2-6s?variant=39898595459187

Eco Power WP250T:
https://bdrca.blogspot.com/2024/08/which-servo-is-best.html


TEKNO instructions are great, I have build thread here based on the 2.0 buggy, but it includes tips that will be universal to your build as well have fun!

Thread 'BUILD/REVIEW EB48 2.0'

Sep 7, 2020

*** IMPORTANT UPDATE ****

I am no longer maintaining this thread, I have sold this car and have chosen to move over to the following platform:
https://www.rcgroups.com/forums/showthread.php?3855991-BUILD-REVIEW-HB-Racing-E8T-evo3

Although this thread will be targeted for club racing, I expect a lot of this information may be useful for bashers as well. I am a club racer who has been a basher since 1986 and got into club racing around 2010.

I have about 4 years of experience racing the EB48.3 and EB48.4...

• Billl DeLong
• Replies: 109
• Forum: EB48

• 
• 

Do you have the dimensions/diagram for that WP250T?

 

[Billl DeLong]

Do you have the dimensions/diagram for that WP250T?

https://www.amainhobbies.com/ecopow...metal-gear-metal-case-servo-ecp-250t/p1466471

 

[RCFinger]

https://www.amainhobbies.com/ecopow...metal-gear-metal-case-servo-ecp-250t/p1466471

Cheers, but i was looking for the measurement from the under side of the mounting lug/tabs to the top of the case, not including the splined shaft. I could sort of infer it from the video, but not for sure.

 

[Billl DeLong]

I can assure you this servo fits, it's the most popular servo among most racers in my area who also run TEKNO

 

[davidg]

I'm running the HW xr8 plus g2s with a Tekin 2000kv and protek 170tbl. This is my first etruggy, I haven't had a chance to run it yet. But I did run a similar setup in my ebuggy last year. Except my ebuggy has Tekin 1900kv.

 

[RCFinger]

I can assure you this servo fits, it's the most popular servo among most racers in my area who also run TEKNO

Fair enough!

 

[Ferrebee88]

I run these in just about everything. I had one in my MT410, I have one in my SCT410.3, I have the LP version in my Associated B7, I've put them in Arrma Kratons. Heck, I currently have one in my Vanquish 1/10 trail truck. They have plenty of power and speed. I've never had one fail in a 1/10 or 1/8 rig.
https://www.amainhobbies.com/mks-se...-high-torque-digital-servo-mks-hbl550/p885130

 

[RustyUs]

I'm running the HW xr8 plus g2s with a Tekin 2000kv and protek 170tbl. This is my first etruggy, I haven't had a chance to run it yet. But I did run a similar setup in my ebuggy last year. Except my ebuggy has Tekin 1900kv.

I see the XeRun 4274 only comes in 2250kv. Is that the reason why you went with Tekin's 2000kv motor?

 

[davidg]

I couple of my friends have the 2250kv motor. They told me that it was overkill for most of the tracks around here. Usually they have the motors turned down. So I thought the 2000kv would be a little easier to control.