DougV
Member
- Messages
- 6
- Reaction score
- 3
Starting to assemble my EB48 2.1 and a question about the ring and pinion mesh. Once assembled I decided to put a shim on the ring side to make a tighter mesh. It really didn’t do anything because it is pretty tight in the case. So what I did was to put a shim under the head of the pinion gear to deepen it into the ring. Once all tightened up I still have the a click between the gears that I think is acceptable. I gues I’m asking if anyone has done this or if anyone foresee a problem?