• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

Proline screw on body mounts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

JTRC

New member
Messages
1
Reaction score
0
What is everyone using for the MT410 for the screw on body caps and posts? I’m not finding one made for the mt410
 
I have not seen anything specific for the MT410. Those prolines will work you just need modify the mounting supports on the towers so you can screw them in.
 
If you can find them
Proline used to make a set for the sct410 .
 
Anyone know how to runs these body screws with the M2C thick shock towers? Needs a bar/beam and screws. Saw the relevant pics from Overkill, but no specifics.
 
Answered my own question... With the thick M2C shock towers you should run the Arrma body posts as recommended by M2C. You then need to cut/sand the circlip tips off flat and drill them for the M4 set screws.
 
Last edited:

Recent Popular Liked

Back
Top