410 2.0 Hinge Pin Braces "A,B,C,D Blocks"

[RustyUs]

So, if I'm seeing things correctly...

The stock setup is based off the center position of the -1mm A,B optional blocks for the front. For the rear, the stock setup is based off the center position of the -2mm C,D optional blocks.

Is this correct?

 

[Matthew_Armeni]

Correct.

 

[Islandlife]

Ive ordered the aluminum C/D blocks for my sct410 2.0. Are these the correct inserts for them?
https://www.teknorc.com/shop/tkr5165-v2-hinge-pin-inserts-wheelbase-shims-ebnbetntsct/

 

[RustyUs]

Ive ordered the aluminum C/D blocks for my sct410 2.0. Are these the correct inserts for them?
https://www.teknorc.com/shop/tkr5165-v2-hinge-pin-inserts-wheelbase-shims-ebnbetntsct/

Those would be the ones I'd order

 

[theDogger]

What are the benifits of the different hinge pin braces in regards to the I assume the offset of -1 and -2?

What is the stock offset for the SCT410 2.0?

TKR9161B - Hinge Pin Brace (CNC, 7075, -1mm LRC, EB/NB48 2.1, A Block)
TKR9162B - Hinge Pin Brace (CNC, 7075, -1mm LRC, EB/NB48 2.1, B Block)
TKR9163B - Hinge Pin Brace Hinge Pin Brace (CNC, 7075, -1mm LRC, C Block)
TKR9163C - Hinge Pin Brace (CNC, 7075, -2mm LRC, EB/NB48 2.1, C Block)
TKR9164B - Hinge Pin Brace (CNC, 7075, -1mm LRC, EB/NB48 2.1, D Block)
TKR9164C - Hinge Pin Brace (CNC, 7075, -2mm LRC, EB/NB48 2.1, D Block)

 

[RustyUs]

What is the stock offset for the SCT410 2.0?

Stock setup/hybrid blocks are based off of optional block part numbers that are marked in blue...

 

[theDogger]

So what is the difference between a -1 and -2? What handling does this effect?

 

[RustyUs]

So what is the difference between a -1 and -2? What handling does this effect?

The only thing I can come up with is roll centers.
See.... Choosing Optional 0, -1mm, and -2mm Hinge Pin Braces

 

[mrb550k]

The box stock setup in the manual says it gives 1 degree of anti-squat. However center pills on a -1 C block and -2 D block (equivalent to the kit blocks) gives 2 degrees anti-squat on the EB48 2.2, and in both the EB and the SCT, the blocks sit flat on the chassis. The spacing between the blocks is the same in both the EB and SCT since the pins are identical.

So is the *actual* anti-squat in the box stock SCT setup 2 degrees?

 

[RustyUs]

The box stock setup in the manual says it gives 1 degree of anti-squat. However center pills on a -1 C block and -2 D block (equivalent to the kit blocks) gives 2 degrees anti-squat on the EB48 2.2, and in both the EB and the SCT, the blocks sit flat on the chassis. The spacing between the blocks is the same in both the EB and SCT since the pins are identical.

So is the *actual* anti-squat in the box stock SCT setup 2 degrees?

The EB48 2.2's hinge pin braces are -1mm C Block and a -2mm D Block
The SCT410 2.0's hinge pin braces are comparable to a -2mm C Block and a -2mm D Block

 

[mrb550k]

Thanks! I read your post of Mar 30, 2024 above wrong. Got it now.